Andreas Graf wrote: what does your host see? lspci is a useful cmd, i see... 00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) 00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) 00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) 00:07.4 Non-VGA unclassified device: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 00:0a.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) 00:0c.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 07) 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS you? jackc... ps: i have a rage pro 128 and its fine on suse 8.0. > > Hi, > > I have an ATI all in wonder pro which ran fine under > Suse 6.4/XFree86 3x > > I have upgraded to Suse 8/XFree86 4 and I am having > trouble when using xatitv to watch video (cursor and pixmap > garbled). In XFree 3.x I used the line VideoRam 7328 in my > XF86Config, but it does not seem to be recognized in XFree 4? > > Section "Device" > BoardName "Mach64" > BusID "1:5:0" > Driver "ati" > Identifier "Device[0]" > Screen 0 > VendorName "ATI" > VideoRam 7328 > EndSection > > any ideas? Below is part of my XFRee0.log > > (II) Primary Device is: PCI 01:05:0 > (II) ATI: Candidate "Device" section "Device[0]". > (II) ATI: Shared PCI/AGP Mach64 in slot 1:5:0 detected. > (II) ATI: Shared PCI/AGP Mach64 in slot 1:5:0 assigned to active "Device" > secti > on "Device[0]". > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xefffff80 - 0xefffffff (0x80) MX[B] > [6] -1 0xeddff000 - 0xeddfffff (0x1000) MX[B] > [7] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B] > [8] -1 0xefec0000 - 0xefedffff (0x20000) MX[B](B) > [9] -1 0xefeff000 - 0xefefffff (0x1000) MX[B](B) > [10] -1 0xee000000 - 0xeeffffff (0x1000000) MX[B](B) > [11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [12] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [13] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] > [14] -1 0x0000d400 - 0x0000d43f (0x40) IX[B] > [15] -1 0x0000d800 - 0x0000d87f (0x80) IX[B] > [16] -1 0x0000dc00 - 0x0000dc03 (0x4) IX[B] > [17] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B](B) > (II) Loading sub module "atimisc" > (II) LoadModule: "atimisc" > (II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o > (II) Module atimisc: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 6.4.8 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.5 > (II) resource ranges after probing: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xefffff80 - 0xefffffff (0x80) MX[B] > [6] -1 0xeddff000 - 0xeddfffff (0x1000) MX[B] > [7] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B] > [8] -1 0xefec0000 - 0xefedffff (0x20000) MX[B](B) > [9] -1 0xefeff000 - 0xefefffff (0x1000) MX[B](B) > [10] -1 0xee000000 - 0xeeffffff (0x1000000) MX[B](B) > [11] 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [15] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [16] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] > [17] -1 0x0000d400 - 0x0000d43f (0x40) IX[B] > [18] -1 0x0000d800 - 0x0000d87f (0x80) IX[B] > [19] -1 0x0000dc00 - 0x0000dc03 (0x4) IX[B] > [20] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B](B) > [21] 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [22] 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (==) ATI(0): Chipset: "ati". > (**) ATI(0): Depth 24, (--) framebuffer bpp 32 > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) ATI(0): Primary V_BIOS segment is: 0xc000 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) ATI(0): VESA BIOS detected > (II) ATI(0): VESA VBE Version 2.0 > (II) ATI(0): VESA VBE Total Mem: 8192 kB > (II) ATI(0): VESA VBE OEM: ATI MACH64 > (II) ATI(0): VESA VBE OEM Software Rev: 1.0 > (II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc. > (II) ATI(0): VESA VBE OEM Product: MACH64GT > (II) ATI(0): VESA VBE OEM Product Rev: 01.00 > (II) ATI(0): VESA VBE DDC supported > (II) ATI(0): VESA VBE DDC Level 2 > (II) ATI(0): VESA VBE DDC transfer in appr. 2 sec. > (II) ATI(0): VESA VBE DDC read successfully > (II) ATI(0): Manufacturer: SNY Model: 770 Serial#: 5660380 > (II) ATI(0): Year: 1998 Week: 37 > (II) ATI(0): EDID Version: 1.1 > (II) ATI(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V > (II) ATI(0): Sync: Separate Composite SyncOnGreen > (II) ATI(0): Max H-Image Size [cm]: horiz.: 33 vert.: 24 > (II) ATI(0): Gamma: 2.50 > (II) ATI(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display > (II) ATI(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.595 > (II) ATI(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298 > (II) ATI(0): Supported VESA Video Modes: > (II) ATI(0): 1024x768@87Hz (interlaced) > (II) ATI(0): 1024x768@60Hz > (II) ATI(0): 1024x768@70Hz > (II) ATI(0): 1024x768@75Hz > (II) ATI(0): Manufacturer's mask: 0 > (II) ATI(0): Supported Future Video Modes: > (II) ATI(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 > (II) ATI(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 > (II) ATI(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 > (II) ATI(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881 > (II) ATI(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337 > (II) ATI(0): Supported additional Video Mode: > (II) ATI(0): clock: 25.2 MHz Image Size: 312 x 234 mm > (II) ATI(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 > h_border > : 0 > (II) ATI(0): v_active: 480 v_sync: 490 v_sync_end 492 v_blanking: 525 > v_border > : 0 > (II) ATI(0): Serial No: 5660380 > (II) ATI(0): Monitor name: CPD-200EST > (II) ATI(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 70 kHz, > PixCloc > k max 2550 MHz > (--) ATI(0): ATI 3D Rage Pro graphics controller detected. > (--) ATI(0): Chip type 4742 "GB", version 4, foundry UMC, class 0, revision > 0x01 > (--) ATI(0): AGP bus interface detected; block I/O base is 0xA800. > (--) ATI(0): ATI Mach64 adapter detected. > (!!) ATI(0): For information on using the multimedia capabilities > of this adapter, please see http://gatos.sf.net. > (--) ATI(0): Internal RAMDAC (subtype 1) detected. > (==) ATI(0): RGB weight 888 > (==) ATI(0): Default visual is TrueColor > (==) ATI(0): Using gamma correction (1.0, 1.0, 1.0) > (II) ATI(0): Using Mach64 accelerator CRTC. > (II) ATI(0): Storing hardware cursor image at 0xEE7FFC00. > (II) ATI(0): Using 8 MB linear aperture at 0xEE000000. > (!!) ATI(0): Virtual resolutions will be limited to 8191 kB > due to linear aperture size and/or placement of hardware cursor image area. > (II) ATI(0): Using Block 0 MMIO aperture at 0xEFEFF400. > (II) ATI(0): Using Block 1 MMIO aperture at 0xEFEFF000. > (==) ATI(0): Write-combining range (0xee000000,0x800000) > (II) ATI(0): MMIO write caching enabled. > (--) ATI(0): 8192 kB of SGRAM (1:1) detected (using 8191 kB). > (WW) ATI(0): Cannot shadow an accelerated frame buffer. > (--) ATI(0): Internal programmable clock generator detected. > (--) ATI(0): Reference clock 29.500 MHz. > (WW) ATI(0): config file hsync range 22-70kHz not within DDC hsync range > 30-70kH > > _______________________________________________ > > Newbie@XFree86.Org > *** To unsubscribe , or change message options, see: > http://XFree86.Org/mailman/listinfo/newbie -- ------------------------------------------------------------------------------- Jack Craig ImageIntegration 831-684-1375 jackc@imageintegration.com
