Hi,
I have an ATI all in wonder pro which ran fine under
Suse 6.4/XFree86 3x
I have upgraded to Suse 8/XFree86 4 and I am having
trouble when using xatitv to watch video (cursor and pixmap
garbled). In XFree 3.x I used the line VideoRam 7328 in my
XF86Config, but it does not seem to be recognized in XFree 4?
Section "Device"
BoardName "Mach64"
BusID "1:5:0"
Driver "ati"
Identifier "Device[0]"
Screen 0
VendorName "ATI"
VideoRam 7328
EndSection
any ideas? Below is part of my XFRee0.log
(II) Primary Device is: PCI 01:05:0
(II) ATI: Candidate "Device" section "Device[0]".
(II) ATI: Shared PCI/AGP Mach64 in slot 1:5:0 detected.
(II) ATI: Shared PCI/AGP Mach64 in slot 1:5:0 assigned to active "Device"
secti
on "Device[0]".
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xefffff80 - 0xefffffff (0x80) MX[B]
[6] -1 0xeddff000 - 0xeddfffff (0x1000) MX[B]
[7] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[8] -1 0xefec0000 - 0xefedffff (0x20000) MX[B](B)
[9] -1 0xefeff000 - 0xefefffff (0x1000) MX[B](B)
[10] -1 0xee000000 - 0xeeffffff (0x1000000) MX[B](B)
[11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[14] -1 0x0000d400 - 0x0000d43f (0x40) IX[B]
[15] -1 0x0000d800 - 0x0000d87f (0x80) IX[B]
[16] -1 0x0000dc00 - 0x0000dc03 (0x4) IX[B]
[17] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 6.4.8
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xefffff80 - 0xefffffff (0x80) MX[B]
[6] -1 0xeddff000 - 0xeddfffff (0x1000) MX[B]
[7] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[8] -1 0xefec0000 - 0xefedffff (0x20000) MX[B](B)
[9] -1 0xefeff000 - 0xefefffff (0x1000) MX[B](B)
[10] -1 0xee000000 - 0xeeffffff (0x1000000) MX[B](B)
[11] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[17] -1 0x0000d400 - 0x0000d43f (0x40) IX[B]
[18] -1 0x0000d800 - 0x0000d87f (0x80) IX[B]
[19] -1 0x0000dc00 - 0x0000dc03 (0x4) IX[B]
[20] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
[21] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[22] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) ATI(0): Chipset: "ati".
(**) ATI(0): Depth 24, (--) framebuffer bpp 32
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE Version 2.0
(II) ATI(0): VESA VBE Total Mem: 8192 kB
(II) ATI(0): VESA VBE OEM: ATI MACH64
(II) ATI(0): VESA VBE OEM Software Rev: 1.0
(II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) ATI(0): VESA VBE OEM Product: MACH64GT
(II) ATI(0): VESA VBE OEM Product Rev: 01.00
(II) ATI(0): VESA VBE DDC supported
(II) ATI(0): VESA VBE DDC Level 2
(II) ATI(0): VESA VBE DDC transfer in appr. 2 sec.
(II) ATI(0): VESA VBE DDC read successfully
(II) ATI(0): Manufacturer: SNY Model: 770 Serial#: 5660380
(II) ATI(0): Year: 1998 Week: 37
(II) ATI(0): EDID Version: 1.1
(II) ATI(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) ATI(0): Sync: Separate Composite SyncOnGreen
(II) ATI(0): Max H-Image Size [cm]: horiz.: 33 vert.: 24
(II) ATI(0): Gamma: 2.50
(II) ATI(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) ATI(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.595
(II) ATI(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298
(II) ATI(0): Supported VESA Video Modes:
(II) ATI(0): 1024x768@87Hz (interlaced)
(II) ATI(0): 1024x768@60Hz
(II) ATI(0): 1024x768@70Hz
(II) ATI(0): 1024x768@75Hz
(II) ATI(0): Manufacturer's mask: 0
(II) ATI(0): Supported Future Video Modes:
(II) ATI(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) ATI(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) ATI(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) ATI(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) ATI(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) ATI(0): Supported additional Video Mode:
(II) ATI(0): clock: 25.2 MHz Image Size: 312 x 234 mm
(II) ATI(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800
h_border
: 0
(II) ATI(0): v_active: 480 v_sync: 490 v_sync_end 492 v_blanking: 525
v_border
: 0
(II) ATI(0): Serial No: 5660380
(II) ATI(0): Monitor name: CPD-200EST
(II) ATI(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 70 kHz,
PixCloc
k max 2550 MHz
(--) ATI(0): ATI 3D Rage Pro graphics controller detected.
(--) ATI(0): Chip type 4742 "GB", version 4, foundry UMC, class 0, revision
0x01
(--) ATI(0): AGP bus interface detected; block I/O base is 0xA800.
(--) ATI(0): ATI Mach64 adapter detected.
(!!) ATI(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 888
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(II) ATI(0): Storing hardware cursor image at 0xEE7FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0xEE000000.
(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0xEFEFF400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xEFEFF000.
(==) ATI(0): Write-combining range (0xee000000,0x800000)
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 8192 kB of SGRAM (1:1) detected (using 8191 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 29.500 MHz.
(WW) ATI(0): config file hsync range 22-70kHz not within DDC hsync range
30-70kH
