Hi, In case vesa has remained unaccelerated downgrading to 3.3.6 may be the better alternative... Lionel --- Alan Hourihane <alanh@fairlite.demon.co.uk> wrote: > Sounds like your chip isn't supported by the S3 driver in 4.x. Whereas > RH 7.2 on your machine may well have been using 3.3.6. > > This seems to be stinging quite a few people with S3 cards. > > The quick fix, is to modify your XF86Config file and change the > line that says. > > Driver "s3" > > to > > Driver "vesa" > > Other than that, you'll need to drop back to 3.3.6. > > Alan. > > On Mon, May 13, 2002 at 10:39:16 -0400, NGUYEN DAI Quy wrote: > > Hi all, > > > > I'm using RH7.2 (kernel 2.4.9) with XFree86-4.1 on S3 Triov64 card. It > > works fine. > > When I try to install RH7.3 (XFree86-4.2.x): my card was detected OK, > > the X server test during installation is OK. But after reboot, I can > > not run X at all. When I type "startx", XFree86 gives me an error about > > config file, which was created by RH installer. > > > > So I try Xconfigurator but NO LUCK because this program gives > > me a core dump file :( > > __________________________________________________ Do You Yahoo!? LAUNCH - Your Yahoo! Music Experience http://launch.yahoo.com
