This is a multi-part message in MIME format. ------=_NextPart_000_000B_01C20CA9.F81187E0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I have been setting up a samba/FTP server. There was one setup and running and I crashed it last week. It crashed after I modified the rights in the files of the ftp server and altered some of the user information. The server is still running, but X windows will not run on the startx command. I can only log in as the root. In an effort to understand the problem I built another just like it and it crashed after I finished setting the user rights. On reboot I notice the the ATD service will not start and think that that is a good place to start. Please give me some suggestions on what might be causing this problem and what you think I might do to remedy it. Attached is the XFree86.0.log for you to get an idea of what happens during boot. Thanks, Mark Mitchell ------=_NextPart_000_000B_01C20CA9.F81187E0 Content-Type: application/octet-stream; name="XFree86.0.log" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="XFree86.0.log" =0A= XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System=0A= (protocol Version 11, revision 0, vendor release 6510)=0A= Release Date: 2 June 2001=0A= If the server is older than 6-12 months, or if your card is=0A= newer than the above date, look for a newer version before=0A= reporting problems. (See http://www.XFree86.Org/FAQ)=0A= Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF] =0A= Build Host: stripples.devel.redhat.com=0A= =0A= Module Loader present=0A= (=3D=3D) Log file: "/var/log/XFree86.0.log", Time: Wed Jun 5 14:36:27 = 2002=0A= (=3D=3D) Using config file: "/etc/X11/XF86Config-4"=0A= Markers: (--) probed, (**) from config file, (=3D=3D) default setting,=0A= (++) from command line, (!!) notice, (II) informational,=0A= (WW) warning, (EE) error, (NI) not implemented, (??) unknown.=0A= (=3D=3D) ServerLayout "Anaconda Configured"=0A= (**) |-->Screen "Screen0" (0)=0A= (**) | |-->Monitor "Monitor0"=0A= (**) | |-->Device "ATI Mach64"=0A= (**) |-->Input Device "Mouse0"=0A= (**) |-->Input Device "Keyboard0"=0A= (**) Option "XkbRules" "xfree86"=0A= (**) XKB: rules: "xfree86"=0A= (**) Option "XkbModel" "pc101"=0A= (**) XKB: model: "pc101"=0A= (**) Option "XkbLayout" "us"=0A= (**) XKB: layout: "us"=0A= (=3D=3D) Keyboard: CustomKeycode disabled=0A= (**) FontPath set to "unix/:7100"=0A= (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"=0A= (=3D=3D) ModulePath set to "/usr/X11R6/lib/modules"=0A= (--) using VT number 7=0A= =0A= (II) Open APM successful=0A= (II) Module ABI versions:=0A= XFree86 ANSI C Emulation: 0.1=0A= XFree86 Video Driver: 0.4=0A= XFree86 XInput driver : 0.2=0A= XFree86 Server Extension : 0.1=0A= XFree86 Font Renderer : 0.2=0A= (II) Loader running on linux=0A= (II) LoadModule: "bitmap"=0A= (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a=0A= (II) Module bitmap: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= Module class: XFree86 Font Renderer=0A= ABI class: XFree86 Font Renderer, version 0.2=0A= (II) Loading font Bitmap=0A= (II) LoadModule: "pcidata"=0A= (II) Loading /usr/X11R6/lib/modules/libpcidata.a=0A= (II) Module pcidata: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 0.1.0=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) PCI: Probing config type using method 1=0A= (II) PCI: Config type is 1=0A= (II) PCI: stages =3D 0x03, oldVal1 =3D 0x00000000, mode1Res1 =3D = 0x80000000=0A= (II) PCI: PCI scan (all values are in hex)=0A= (II) PCI: 00:00:0: chip 1106,0691 card 1043,80e8 rev c4 class 06,00,00 = hdr 00=0A= (II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 = hdr 01=0A= (II) PCI: 00:04:0: chip 1106,0686 card 1043,80e8 rev 22 class 06,01,00 = hdr 80=0A= (II) PCI: 00:04:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a = hdr 00=0A= (II) PCI: 00:04:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 = hdr 00=0A= (II) PCI: 00:04:3: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 = hdr 00=0A= (II) PCI: 00:04:4: chip 1106,3057 card 0000,0000 rev 30 class 06,00,00 = hdr 00=0A= (II) PCI: 00:09:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 = hdr 00=0A= (II) PCI: 01:00:0: chip 1002,4742 card 1002,0084 rev 5c class 03,00,00 = hdr 00=0A= (II) PCI: End of PCI scan=0A= (II) LoadModule: "scanpci"=0A= (II) Loading /usr/X11R6/lib/modules/libscanpci.a=0A= (II) Module scanpci: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 0.1.0=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) UnloadModule: "scanpci"=0A= (II) Unloading /usr/X11R6/lib/modules/libscanpci.a=0A= (II) Host-to-PCI bridge:=0A= (II) PCI-to-ISA bridge:=0A= (II) Host-to-PCI bridge:=0A= (II) PCI-to-PCI bridge:=0A= (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)=0A= (II) Bus 0 I/O range:=0A= [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]=0A= (II) Bus 0 non-prefetchable memory range:=0A= [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]=0A= (II) Bus 0 prefetchable memory range:=0A= [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]=0A= (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x08 (VGA_EN is set)=0A= (II) Bus 1 I/O range:=0A= [0] -1 0x0000d000 - 0x0000dfff (0x1000) IX[B]=0A= (II) Bus 1 non-prefetchable memory range:=0A= [0] -1 0xf9800000 - 0xfbefffff (0x2700000) MX[B]=0A= (II) Bus 1 prefetchable memory range:=0A= [0] -1 0xfbf00000 - 0xfbffffff (0x100000) MX[B]=0A= (II) Bus -1: bridge is at (0:4:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)=0A= (II) Bus -1 I/O range:=0A= (II) Bus -1 non-prefetchable memory range:=0A= (II) Bus -1 prefetchable memory range:=0A= (II) Bus -1: bridge is at (0:0:0), (-1,-1,0), BCTRL: 0x08 (VGA_EN is set)=0A= (II) Bus -1 I/O range:=0A= [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]=0A= (II) Bus -1 non-prefetchable memory range:=0A= [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]=0A= (II) Bus -1 prefetchable memory range:=0A= [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]=0A= (--) PCI:*(1:0:0) ATI Mach64 GB rev 92, Mem @ 0xfa000000/24, = 0xf9800000/12, I/O @ 0xd800/8, BIOS @ 0xfbfe0000/17=0A= (II) Addressable bus resource ranges are=0A= [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]=0A= [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]=0A= (II) OS-reported resource ranges:=0A= [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A= [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [6] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= (II) Active PCI resource ranges:=0A= [0] -1 0xf9000000 - 0xf90000ff (0x100) MX[B]=0A= [1] -1 0xfc000000 - 0xfdffffff (0x2000000) MX[B]=0A= [2] -1 0xfbfe0000 - 0xfbffffff (0x20000) MX[B](B)=0A= [3] -1 0xf9800000 - 0xf9800fff (0x1000) MX[B](B)=0A= [4] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)=0A= [5] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]=0A= [6] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]=0A= [7] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]=0A= [8] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]=0A= [9] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)=0A= (II) Active PCI resource ranges after removing overlaps:=0A= [0] -1 0xf9000000 - 0xf90000ff (0x100) MX[B]=0A= [1] -1 0xfc000000 - 0xfdffffff (0x2000000) MX[B]=0A= [2] -1 0xfbfe0000 - 0xfbffffff (0x20000) MX[B](B)=0A= [3] -1 0xf9800000 - 0xf9800fff (0x1000) MX[B](B)=0A= [4] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)=0A= [5] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]=0A= [6] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]=0A= [7] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]=0A= [8] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]=0A= [9] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)=0A= (II) OS-reported resource ranges after removing overlaps with PCI:=0A= [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A= [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [6] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= (II) All system resource ranges:=0A= [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A= [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [5] -1 0xf9000000 - 0xf90000ff (0x100) MX[B]=0A= [6] -1 0xfc000000 - 0xfdffffff (0x2000000) MX[B]=0A= [7] -1 0xfbfe0000 - 0xfbffffff (0x20000) MX[B](B)=0A= [8] -1 0xf9800000 - 0xf9800fff (0x1000) MX[B](B)=0A= [9] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)=0A= [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [11] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= [12] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]=0A= [13] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]=0A= [14] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]=0A= [15] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]=0A= [16] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)=0A= (II) LoadModule: "GLcore"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a=0A= (II) Module GLcore: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) LoadModule: "dbe"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a=0A= (II) Module dbe: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= Module class: XFree86 Server Extension=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading extension DOUBLE-BUFFER=0A= (II) LoadModule: "extmod"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a=0A= (II) Module extmod: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= Module class: XFree86 Server Extension=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading extension SHAPE=0A= (II) Loading extension MIT-SUNDRY-NONSTANDARD=0A= (II) Loading extension BIG-REQUESTS=0A= (II) Loading extension SYNC=0A= (II) Loading extension MIT-SCREEN-SAVER=0A= (II) Loading extension XC-MISC=0A= (II) Loading extension XFree86-VidModeExtension=0A= (II) Loading extension XFree86-Misc=0A= (II) Loading extension XFree86-DGA=0A= (II) Loading extension DPMS=0A= (II) Loading extension FontCache=0A= (II) Loading extension TOG-CUP=0A= (II) Loading extension Extended-Visual-Information=0A= (II) Loading extension XVideo=0A= (II) Loading extension XVideo-MotionCompensation=0A= (II) LoadModule: "fbdevhw"=0A= (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a=0A= (II) Module fbdevhw: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 0.0.2=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) LoadModule: "pex5"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a=0A= (II) Module pex5: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= Module class: XFree86 Server Extension=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading extension X3D-PEX=0A= (II) LoadModule: "dri"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a=0A= (II) Module dri: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading sub module "drm"=0A= (II) LoadModule: "drm"=0A= (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a=0A= (II) Module drm: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading extension XFree86-DRI=0A= (II) LoadModule: "glx"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a=0A= (II) Module glx: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading sub module "GLcore"=0A= (II) LoadModule: "GLcore"=0A= (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a=0A= (II) Loading extension GLX=0A= (II) LoadModule: "pex5"=0A= (II) Reloading /usr/X11R6/lib/modules/extensions/libpex5.a=0A= (II) Loading extension X3D-PEX=0A= (II) LoadModule: "record"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a=0A= (II) Module record: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.13.0=0A= Module class: XFree86 Server Extension=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading extension RECORD=0A= (II) LoadModule: "xie"=0A= (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a=0A= (II) Module xie: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= Module class: XFree86 Server Extension=0A= ABI class: XFree86 Server Extension, version 0.1=0A= (II) Loading extension XIE=0A= (II) LoadModule: "ati"=0A= (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o=0A= (II) Module ati: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 6.3.6=0A= Module class: XFree86 Video Driver=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) LoadModule: "mouse"=0A= (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o=0A= (II) Module mouse: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= Module class: XFree86 XInput Driver=0A= ABI class: XFree86 XInput driver, version 0.2=0A= (II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga=0A= (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),=0A= ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),=0A= ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),=0A= ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),=0A= ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),=0A= ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),=0A= ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),=0A= ATI Rage 128 Mobility ML (AGP)=0A= (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),=0A= ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),=0A= ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),=0A= ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),=0A= ATI Radeon Mobility LZ (AGP)=0A= (II) Primary Device is: PCI 01:00:0=0A= (II) ATI: Candidate "Device" section "ATI Mach64".=0A= (II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 detected.=0A= (II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 assigned to active = "Device" section "ATI Mach64".=0A= (II) resource ranges after xf86ClaimFixedResources() call:=0A= [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A= [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [5] -1 0xf9000000 - 0xf90000ff (0x100) MX[B]=0A= [6] -1 0xfc000000 - 0xfdffffff (0x2000000) MX[B]=0A= [7] -1 0xfbfe0000 - 0xfbffffff (0x20000) MX[B](B)=0A= [8] -1 0xf9800000 - 0xf9800fff (0x1000) MX[B](B)=0A= [9] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)=0A= [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [11] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= [12] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]=0A= [13] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]=0A= [14] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]=0A= [15] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]=0A= [16] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)=0A= (II) Loading sub module "atimisc"=0A= (II) LoadModule: "atimisc"=0A= (II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o=0A= (II) Module atimisc: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 6.3.6=0A= Module class: XFree86 Video Driver=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) resource ranges after probing:=0A= [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A= [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [5] -1 0xf9000000 - 0xf90000ff (0x100) MX[B]=0A= [6] -1 0xfc000000 - 0xfdffffff (0x2000000) MX[B]=0A= [7] -1 0xfbfe0000 - 0xfbffffff (0x20000) MX[B](B)=0A= [8] -1 0xf9800000 - 0xf9800fff (0x1000) MX[B](B)=0A= [9] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)=0A= [10] 0 0x000a0000 - 0x000affff (0x10000) MS[B]=0A= [11] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]=0A= [12] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]=0A= [13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [14] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= [15] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]=0A= [16] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]=0A= [17] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]=0A= [18] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]=0A= [19] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)=0A= [20] 0 0x000003b0 - 0x000003bb (0xc) IS[B]=0A= [21] 0 0x000003c0 - 0x000003df (0x20) IS[B]=0A= (II) Setting vga for screen 0.=0A= (=3D=3D) ATI(0): Chipset: "ati".=0A= (**) ATI(0): Depth 16, (--) framebuffer bpp 16=0A= (II) Loading sub module "int10"=0A= (II) LoadModule: "int10"=0A= (II) Loading /usr/X11R6/lib/modules/linux/libint10.a=0A= (II) Module int10: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) ATI(0): Primary V_BIOS segment is: 0xc000=0A= (II) Loading sub module "ddc"=0A= (II) LoadModule: "ddc"=0A= (II) Loading /usr/X11R6/lib/modules/libddc.a=0A= (II) Module ddc: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) Loading sub module "vbe"=0A= (II) LoadModule: "vbe"=0A= (II) Loading /usr/X11R6/lib/modules/libvbe.a=0A= (II) Module vbe: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) ATI(0): VESA BIOS detected=0A= (II) ATI(0): VESA VBE Version 2.0=0A= (II) ATI(0): VESA VBE Total Mem: 8192 kB=0A= (II) ATI(0): VESA VBE OEM: ATI MACH64=0A= (II) ATI(0): VESA VBE OEM Software Rev: 1.0=0A= (II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc.=0A= (II) ATI(0): VESA VBE OEM Product: MACH64GT=0A= (II) ATI(0): VESA VBE OEM Product Rev: 01.00=0A= (II) ATI(0): VESA VBE DDC supported=0A= (II) ATI(0): VESA VBE DDC Level 2=0A= (II) ATI(0): VESA VBE DDC transfer in appr. 2 sec.=0A= (II) ATI(0): VESA VBE DDC read successfully=0A= (II) ATI(0): Manufacturer: KDS Model: 5af Serial#: 482004551=0A= (II) ATI(0): Year: 1998 Week: 16=0A= (II) ATI(0): EDID Version: 1.0=0A= (II) ATI(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V=0A= (II) ATI(0): Sync: Separate=0A= (II) ATI(0): Max H-Image Size [cm]: horiz.: 26 vert.: 19=0A= (II) ATI(0): Gamma: 1.00=0A= (II) ATI(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display=0A= (II) ATI(0): redX: 0.625 redY: 0.340 greenX: 0.302 greenY: 0.600=0A= (II) ATI(0): blueX: 0.142 blueY: 0.065 whiteX: 0.281 whiteY: 0.312=0A= (II) ATI(0): Supported VESA Video Modes:=0A= (II) ATI(0): 720x400@70Hz=0A= (II) ATI(0): 640x480@60Hz=0A= (II) ATI(0): 640x480@75Hz=0A= (II) ATI(0): 800x600@75Hz=0A= (II) ATI(0): 832x624@75Hz=0A= (II) ATI(0): 1024x768@60Hz=0A= (II) ATI(0): Manufacturer's mask: 0=0A= (II) ATI(0): Supported Future Video Modes:=0A= (II) ATI(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833=0A= (II) ATI(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853=0A= (--) ATI(0): ATI 3D Rage Pro graphics controller detected.=0A= (--) ATI(0): Chip type 4742 "GB", version 4, foundry UMC, class 0, = revision 0x01.=0A= (--) ATI(0): AGP bus interface detected; block I/O base is 0xD800.=0A= (--) ATI(0): ATI Mach64 adapter detected.=0A= (--) ATI(0): Internal RAMDAC (subtype 1) detected.=0A= (=3D=3D) ATI(0): RGB weight 565=0A= (=3D=3D) ATI(0): Default visual is TrueColor=0A= (=3D=3D) ATI(0): Using gamma correction (1.0, 1.0, 1.0)=0A= (II) ATI(0): Using Mach64 accelerator CRTC.=0A= (II) ATI(0): Storing hardware cursor image at 0xFA7FFC00.=0A= (II) ATI(0): Using 8 MB linear aperture at 0xFA000000.=0A= (!!) ATI(0): Virtual resolutions will be limited to 8191 kB=0A= due to linear aperture size and/or placement of hardware cursor image = area.=0A= (II) ATI(0): Using Block 0 MMIO aperture at 0xF9800400.=0A= (II) ATI(0): Using Block 1 MMIO aperture at 0xF9800000.=0A= (=3D=3D) ATI(0): Write-combining range (0xfa000000,0x800000)=0A= (II) ATI(0): MMIO write caching enabled.=0A= (--) ATI(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).=0A= (WW) ATI(0): Cannot shadow an accelerated frame buffer.=0A= (--) ATI(0): Internal programmable clock generator detected.=0A= (--) ATI(0): Reference clock 157.5/11 (14.318) MHz.=0A= (II) ATI(0): Monitor0: Using hsync range of 28.00-55.00 kHz=0A= (II) ATI(0): Monitor0: Using vrefresh range of 40.00-120.00 Hz=0A= (II) ATI(0): Maximum clock: 230.00 MHz=0A= (II) ATI(0): Not using mode "1400x1050" (hsync out of range)=0A= (II) ATI(0): Not using mode "1400x1050" (hsync out of range)=0A= (II) ATI(0): Not using mode "1400x1050" (hsync out of range)=0A= (II) ATI(0): Not using mode "1400x1050" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1024x768" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1024x768" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1024x768" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1152x864" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1280x960" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1280x960" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1280x1024" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1280x1024" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1280x1024" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1600x1200" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1600x1200" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1600x1200" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1600x1200" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1600x1200" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1792x1344" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1792x1344" (bad mode = clock/interlace/doublescan)=0A= (II) ATI(0): Not using default mode "1856x1392" (hsync out of range)=0A= (II) ATI(0): Not using default mode "1856x1392" (bad mode = clock/interlace/doublescan)=0A= (II) ATI(0): Not using default mode "1920x1440" (bad mode = clock/interlace/doublescan)=0A= (II) ATI(0): Not using default mode "1920x1440" (bad mode = clock/interlace/doublescan)=0A= (--) ATI(0): Virtual size is 1024x768 (pitch 1024)=0A= (**) ATI(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz=0A= (II) ATI(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 = 777 806 -hsync -vsync=0A= (--) ATI(0): Display dimensions: (26, 19) cm=0A= (--) ATI(0): DPI set to (100, 102)=0A= (II) Loading sub module "xaa"=0A= (II) LoadModule: "xaa"=0A= (II) Loading /usr/X11R6/lib/modules/libxaa.a=0A= (II) Module xaa: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) Loading sub module "ramdac"=0A= (II) LoadModule: "ramdac"=0A= (II) Loading /usr/X11R6/lib/modules/libramdac.a=0A= (II) Module ramdac: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 0.1.0=0A= ABI class: XFree86 Video Driver, version 0.4=0A= (II) Loading sub module "fb"=0A= (II) LoadModule: "fb"=0A= (II) Loading /usr/X11R6/lib/modules/libfb.a=0A= (II) Module fb: vendor=3D"The XFree86 Project"=0A= compiled for 4.1.0, module version =3D 1.0.0=0A= ABI class: XFree86 ANSI C Emulation, version 0.1=0A= (II) do I need RAC? No, I don't.=0A= (II) resource ranges after preInit:=0A= [0] 0 0xf9800000 - 0xf9800fff (0x1000) MS[B]=0A= [1] 0 0xfa000000 - 0xfaffffff (0x1000000) MS[B]=0A= [2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)=0A= [3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)=0A= [4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]=0A= [5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]=0A= [6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]=0A= [7] -1 0xf9000000 - 0xf90000ff (0x100) MX[B]=0A= [8] -1 0xfc000000 - 0xfdffffff (0x2000000) MX[B]=0A= [9] -1 0xfbfe0000 - 0xfbffffff (0x20000) MX[B](B)=0A= [10] -1 0xf9800000 - 0xf9800fff (0x1000) MX[B](B)=0A= [11] -1 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)=0A= [12] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)=0A= [13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)=0A= [14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)=0A= [15] 0 0x0000d800 - 0x0000d8ff (0x100) IS[B]=0A= [16] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]=0A= [17] -1 0x00000000 - 0x000000ff (0x100) IX[B]=0A= [18] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]=0A= [19] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]=0A= [20] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]=0A= [21] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]=0A= [22] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)=0A= [23] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)=0A= [24] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)=0A= (=3D=3D) ATI(0): Write-combining range (0xfa000000,0x800000)=0A= (II) ATI(0): Using XFree86 Acceleration Architecture (XAA)=0A= Screen to screen bit blits=0A= Solid filled rectangles=0A= 8x8 mono pattern filled rectangles=0A= Indirect CPU to Screen color expansion=0A= Solid Lines=0A= Offscreen Pixmaps=0A= Setting up tile and stipple cache:=0A= 32 128x128 slots=0A= 18 256x256 slots=0A= 6 512x512 slots=0A= (=3D=3D) ATI(0): Backing store disabled=0A= (=3D=3D) ATI(0): Silken mouse enabled=0A= (**) Option "dpms"=0A= (**) ATI(0): DPMS enabled=0A= (II) Initializing built-in extension MIT-SHM=0A= (II) Initializing built-in extension XInputExtension=0A= (II) Initializing built-in extension XTEST=0A= (II) Initializing built-in extension XKEYBOARD=0A= (II) Initializing built-in extension LBX=0A= (II) Initializing built-in extension XC-APPGROUP=0A= (II) Initializing built-in extension SECURITY=0A= (II) Initializing built-in extension XINERAMA=0A= (II) Initializing built-in extension XFree86-Bigfont=0A= (II) Initializing built-in extension RENDER=0A= (**) Option "Protocol" "PS/2"=0A= (**) Mouse0: Protocol: "PS/2"=0A= (**) Option "CorePointer"=0A= (**) Mouse0: Core Pointer=0A= (**) Option "Device" "/dev/psaux"=0A= (=3D=3D) Mouse0: Buttons: 3=0A= (**) Option "Emulate3Buttons" "yes"=0A= (**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50=0A= (**) Option "ZAxisMapping" "4 5"=0A= (**) Mouse0: ZAxisMapping: buttons 4 and 5=0A= (II) Keyboard "Keyboard0" handled by legacy driver=0A= (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)=0A= =0A= Fatal server error:=0A= could not open default font 'fixed'=0A= =0A= When reporting a problem related to a server crash, please send=0A= the full server output, not just the last messages.=0A= This can be found in the log file "/var/log/XFree86.0.log".=0A= Please report problems to xfree86@xfree86.org.=0A= =0A= ------=_NextPart_000_000B_01C20CA9.F81187E0--
