Greetings! I am attempting to run Groove Mechanic ( http://www.coyotes.bc.ca ) under wine. It is able to get past the licence check and record from the sound card. But when I attempt to open a WAV file to process I get the error message: fixme:commdlg:GetFileName95 Flags 0x00000002 not yet implemented and the program hangs with focus switching between the GM window and the file browser window at about one hertz. The file open did actually appear to work once and I got to the next screen, but I have been unable to duplicate that success. Any and all help would be appreciated. SCENARIO ======== My system is a dual boot (specs below) between RedHat 7.2 and WindowsME Groove Mechanic is a shareware utility which allows you to record vynel records through your sound card and filter out clicks, hiss and rumble. Groove Mechanic (GM) works as advertised under WindowsME. I've processed several records with it. I configured the wine which came with RH 7.2. I added the drive specifications to ~/.wine/config (A:FLOPPY, C:WINDOZE, D:APPS, E:GAMES, F:HOME, G:EMUS, H:CDROM, I:/home) and adjusted the paths as my \WINDOWS directory is on the D: drive. All other setting were left to the values found in the sample config file. Wine appears to be working. I can play MSHEARTS.EXE and GM does come up most of the way. As a mundane user I cd to GM's home directory and issue the command $ wine GrooveMech.exe After a bit of a wait, GM's main window comes up along with the acknowlegement that I paid my shareware fee. I now have the choice of recording a file or processing an existing file. If I choose to record, then I must specify the file to capture with. A file browser is presented and all appears to work. I do get the fixme: error message, but it doesn't appeat to affect anything. Also, many errors are generated concerning a bad superblock on the floppy if I don't have a floppy in the drive. If I stick a floppy in there then all the errors go away. Again, the errors don't seem to actually harm anything. So I select a capture file and I am presented with the digital VU meters. I can click RECORD and everything works. The file is captured and it can be replayed. Next I choose to process the file which I just created. It presents me with a file browser to select my input file. I select any WAV file and the focus returns to the GM window, just like it was going to close the file browser window. The the focus switches back to the file browser window. And back and forth continuously at a rate of once per second. This appears to be an endless loop. I've let it go for several minutes to see if it would "punch through" but no success. I <CNTL>C out of wine. Once it actually took the selected file and presented me with the next window, another file browser to select the save file, but I have been unable to duplicate this success. CONFIGURATION ============= AMD K7 650 512MB RAM nVidea GForce 2 MX Sound Blaster Live! 100BaseTX ethernet PRI IDE MASTER: 40GB split into five fat32 partitions and one Linux swap SLAVE: 40GB split into three ext3 partitions (/, /apps, /home) SEC IDE MASTER: CDROM SLAVE: unused RedHat 7.2 full install Windows ME Thanks in advance, Bob Washburne
