|
Hi all~
I have a problem...My linux is Fedora 5,kernel version is
2.6.17.7
i have created a vlan device eth0.2
[root@192 vlan]# cat /proc/net/vlan/eth0.2
eth0.2 VID: 2 REORDER_HDR: 0 dev->priv_flags: 1 total frames received 539 total bytes received 27268 Broadcast/Multicast Rcvd 0 total frames
transmitted
0
total bytes transmitted 0 total headroom inc 0 total encap on xmit 0 Device: eth0 INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 EGRESSS priority Mappings: I type the commands as follows:
[root@192 vlan]# ip address add 192.168.2.254 dev
eth0
[root@192 vlan]# ip route add 192.168.2.0/24 table 254 dev
eth0
[Work]
........................................................................................................
[root@192 vlan]# ip address add 192.168.3.254 dev
eth0.2
[root@192 vlan]# ip route add 192.168.3.0/24 table 254 dev
eth0.2
RTNETLINK answers: Network is down [Not Work] why can't I add routing rules on the vlan device? and how can
i make it work?
thank you very much....
Best regards,
Brian Lu |
_______________________________________________ Vlan mailing list Vlan@xxxxxxxxxxxxxxx http://www.candelatech.com/mailman/listinfo/vlan
