[VLAN] Vlan Problems with software

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Sorry the patch i used was 

Try the patch at http://marc.theaimsgroup.com/?m=104128448402718

Both hunks applyed correct 1 line offset.

Did i apply the correct patch ??


Fernando Rodriguez
-----Mensaje original-----
De: vlan-bounces@xxxxxxxxxxxxxxx [mailto:vlan-bounces@xxxxxxxxxxxxxxx] En
nombre de Peter Stuge
Enviado el: Mi?rcoles, 16 de Agosto de 2006 06:41 p.m.
Para: 'Linux 802.1Q VLAN'
Asunto: Re: [VLAN] Vlan Problems with software

On Wed, Aug 16, 2006 at 09:50:58AM -0500, Fernando Rodriguez wrote:
> Hello,
> I tried the patch and changed to kernel 2.4.33 and now i get this on 
> the console.
> eth0: Oversized(?) Ethernet frame spanned multiple buffers, entry 
> 0x00ba8b status 0xe0000bd5.

Did my patch (two hunks) work for you or did you have to skip the PKT_BUF_SZ
part like Leo Laursen who started the original thread?

If you had to use only the rx_config part to make it work I would expect you
to get the above error messages. In that case we need to find out why the
PKT_BUF_SZ change doesn't work. Since Leo was happy without it you should
also be receiving packets, but I would like to find out if we can improve
the patch.

> It also happends in all the interfaces 4 since the 4 are natsemi.

Yes, I'd expect that. Errors on one, errors on all. Same driver, same

Vlan mailing list

[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]     [Video 4 Linux]

  Powered by Linux