[VLAN] Packet Exit Problems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks Ben, it was a routing issue with my rc.firewall file.  

You all can add bcm5700 with a Broadcom NetXtreme Gigabit Ethernet
card (pretty much all new dell servers) to your list of known working
setups.

Thanks a lot,

David


On Tue, 30 Nov 2004 09:47:06 -0800, Ben Greear <greearb@xxxxxxxxxxxxxxx> wrote:
> David Sankel wrote:
> 
> 
> > Hello List,
> >
> >   I've gotten my new VLAN network almost to the point of perfection
> > and now have a little snag.
> >
> > There are three different VLANS: offices, freenet, and dsl.  My Switch
> > (Dell PowerConnect 3324) has one non-tagged access port for each of
> > these three networks.  The other port is a trunk that can connect to
> > all networks which goes into my linux box.
> >
> > I want to use the linux box as a router so the offices and freenet can
> > use the dsl line to access the internet, but not eachother.
> >
> > So, I did all the configuration necessary to do this and the linux box
> > does its job perfectly.  All computers in the offices and freenet
> > VLANS can ping ssh and do anything they need using the linux box as a
> > router.
> >
> > The snag is that the linux box itself can only ping hosts on the three
> > VLANS and cannot connect with ssh or http.  I'm using kernel 2.6.9 and
> > bcm5700-7.3.5.tar.gz network driver downloaded from broadcom.
> >
> > I'm sort of at a loss as to how to troubleshoot this.  I've tried
> > changing the mtu but that had no positive affect.  Could it be a
> > driver problem?  A configuration problem?
> >
> > I've attached my configuration scripts for reference although I don't
> > think they are the problem.
> >
> > Any help would be greatly appreciated.
> >
> > David J. Sankel
> >
> > PS: The broadcom driver supposedly fully supports vlans.
> 
> You may have routing issues, or maybe you have some firewall rules
> that limit communication?
> 
> Try traceroute to see if the routing looks correct.  Can also use
> tcpdump or ethereal to watch traffic to make sure your arps and other
> packets are going out on the right interface/VLAN.
> 
> Ben
> 
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Vlan mailing list
> > Vlan@xxxxxxxxxxxx
> > http://www.lanforge.com/mailman/listinfo/vlan
> 
> --
> Ben Greear <greearb@xxxxxxxxxxxxxxx>
> Candela Technologies Inc  http://www.candelatech.com
> 
>

[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]     [Video 4 Linux]

  Powered by Linux