[VLAN] vlan & osi-model

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jojan,

I would restate what Ben has said "port-based VLANs work simply because
the equipment knows which port the VLAN comes in on and uses that
information to know that the traffic belongs to a particular VLAN."

There is nothing to do with Layer-1 etc.

Thanks,
Vishwas

-----Original Message-----
From: vlan-bounces@xxxxxxxxxxxxxxx [mailto:vlan-bounces@xxxxxxxxxxxxxxx]
On Behalf Of JOJAN
Sent: Tuesday, September 28, 2004 10:14 AM
To: 'Linux 802.1Q VLAN'
Subject: RE: [VLAN] vlan & osi-model

AFAIK, these are not official names.

Layer <n> VLAN is really a layer 2 solution, but it depends on some
layer
<n> feature to make decision on what to do with a packet.

These rules apply only for those packets which are untagged. When they
enter
the switch, the switch has to TAG it before making a decision as to
which
all ports the frame has to be forwarded.

If the switch has Layer3 configurations, those rules are taken first - 
then comes layer 2 configurations
then comes layer 1 configurations.

Layer3 VLAN is named so because it examines the Layer3 packet for input
to
the rules e.g., IP subnet
Layer2 VLAN is named so because it examines the layer2 features for
input to
the rule e.g., MAC address, Frame Type
Layer1 VALN is named so because it checks the physical features - the
port
thru which it entered the switch

Hope this is clear.

regards

jojan


-----Original Message-----
From: Lars Reimann [mailto:lar@xxxxxxxxxxx]
Sent: Monday, September 27, 2004 5:06 PM
To: Linux 802.1Q VLAN
Subject: [VLAN] vlan & osi-model


hi all,

i've a short question about the different vlan operating modes.

everywhere it says: layer 1 VLAN, layer 2 VLAN, layer 3 VLAN, layer 4-7 
vlan.

my question is, if vlan layer 1 really corresponds to "OSI-Model Layer 1

" VLAN?

i do understand that layer 2 vlan works with mac-addresses like 
osi-model layer 2, and layer 3 vlan inspects ip-adresses for example 
forming vlans per subnet. but i cannot imagine how per-port vlan works 
on layer1.

can anyone help?

_______________________________________________
Vlan mailing list
Vlan@xxxxxxxxxxxx
http://www.lanforge.com/mailman/listinfo/vlan


------------------------------------------------------------------------
---
       "This e-mail and any files transmitted with it are for the sole
use
of the intended recipient(s) and may contain confidential and privileged
information. If you are not the intended recipient, please contact the
sender by reply e-mail and destroy all copies of the original message.

       Any unauthorized review, use, disclosure, dissemination,
forwarding,
printing or copying of this email or any action taken upon this e-mail
is
strictly prohibited and may be unlawful."
------------------------------------------------------------------------
---
_______________________________________________
Vlan mailing list
Vlan@xxxxxxxxxxxx
http://www.lanforge.com/mailman/listinfo/vlan




[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]     [Video 4 Linux]

  Powered by Linux