It was already set to 6. I tried 7 with no difference. It had been working fine with my Pioneer receiver up until this latest version. A direct connection to the TV seems to work with my other setup.
Norm
On Tue, Jul 15, 2014 at 3:15 AM, VDR User <user.vdr@xxxxxxxxx> wrote:
>> New problem though, with 1080i atsc, I'm getting screen blanking every 20 seconds or so. It's fine with 480i with the deinterlacer enabled (as per the log). 720p also works fine with deinterlacer disabled. I can't find anything in the log files that might help with troubleshooting this problem.What exactly is the purpose of that? A way to reduce power consumption
>
> There's a HDMI boost option in config.txt you might want to try:
>
> # Config HDMI Boost
> # Configures the signal strength of the HDMI interface. Default is 0. Try 4 if
> # you have interference issues (or blanking or no display) with hdmi.
> config_hdmi_boost=4 #Set to change signal strength (0 - 7)
by giving hdmi only enough signal/power it needs per your setup?
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
