Hi,
I have problem witch TBS6285 card
(http://www.buydvb.net/dvbt2-tv-tuner-pcie-c-12/tbs6285-dvbt2tc-quad-tv-tuner-pcie-card-p-93.html),
it was difficult to get it work. TBS drivers replace all media tree in
the kernel. After compilation I have problem with IR remote on the
current Hauppage Nova–T card. I decided to use only drivers for new card
with original kernel media build and it is impossible. Then I changed IR
receivers and connect it to the TBS6285. TBS have different 3V IR
receivers.
And the end, VDR onscreen menu is unusable slow. 30s between key
presses. CPE load is more than 2, replay is OK, less than 0.2. Menu
parts, for example settings are good too.
I think it caused by function witch reading information from card.
Do you have any experience with this card or advice?
Thank you
Miloš
TBS driver : v140425
VDR: vdr-2.1.1
Kernel : Linux VDR2 3.12.20 #7 SMP PREEMPT Thu May 29 20:18:02 CEST
2014 i686 GNU/Linux
PS: Years ago I read in the mailing list, that VDR is not plug and
play, it is learning how computer works. I can confirm it and adding:
“VDR is my destiny or my curse” .
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr