On 25.08.2013 05:32, Richard Scobie wrote:
Perhaps a little off topic, but I wonder if anyone can shed any light on the following. I am viewing a signal that is very close to reception threshold - dish a little small, STR value 65%, SNR value 67%, but BER and UNC errors as reported by femon are zero. As long as I leave the femon plugin active on screen, I can view it uninterrupted. If I turn it off, within 60 seconds, the picture will disappear until I activate femon again. Initally it will only show "SIGNAL" and "CARRIER" indicators active, then after a short period, everything will lock again and the channel will re-appear. I am running the latest vdr version with a TT 6400 S2 full feature card, with latest drivers and firmware. Relevent drivers would be perhaps stv090x or stv6110x. Channel parameters DVB-S2, symbol rate 15000 FEC 3/5 QPSK Video 35Mb MPEG2 1920 x 1080, Audio MPEG 270Mb
Do you have both inputs of the TT-S2 6400 connected to satellite cables? And is there actually a signal on both of them? Klaus _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
