Perhaps a little off topic, but I wonder if anyone can shed any light on
the following.
I am viewing a signal that is very close to reception threshold - dish a
little small, STR value 65%, SNR value 67%, but BER and UNC errors as
reported by femon are zero.
As long as I leave the femon plugin active on screen, I can view it
uninterrupted. If I turn it off, within 60 seconds, the picture will
disappear until I activate femon again.
Initally it will only show "SIGNAL" and "CARRIER" indicators active,
then after a short period, everything will lock again and the channel
will re-appear.
I am running the latest vdr version with a TT 6400 S2 full feature card,
with latest drivers and firmware. Relevent drivers would be perhaps
stv090x or stv6110x.
Channel parameters DVB-S2, symbol rate 15000 FEC 3/5 QPSK Video 35Mb
MPEG2 1920 x 1080, Audio MPEG 270Mb
Regards,
Richard
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
