|
On 8/20/2013 6:28 PM, Brian-Imap wrote:
On 8/19/2013 11:10 PM, Marc wrote:
On 19/08/2013 21:11, Brian-Imap
wrote:
On 8/18/2013 8:15 PM, Marc wrote:
On 18/08/2013 19:27, Brian-Imap
wrote:
Hi,
so I tried to look for some kind of info to help me
identify the tuners, this is the most interesting bit I
guess:
VDR-test-cellar (SDB1): udevadm info --query=all
--name=/dev/dvb/adapter1/frontend0 --attribute-walk
looking at device
'/devices/pci0000:00/0000:00:0d.0/0000:02:00.0/dvb/dvb1.frontend0':
KERNEL=="dvb1.frontend0"
SUBSYSTEM=="dvb"
DRIVER==""
You can use this command :
udevadm info -a -p $(udevadm info -q path -n /dev/your/path)
to get the complete tree and watch if you can differentiate
your front end with one or more attributes of the
subsystems.
Marc.
VDR-test-cellar (SDB1): udevadm info
--query=all --name=/dev/dvb/adapter0/frontend0
--attribute-walk
looking at device
'/devices/pci0000:00/0000:00:0d.0/0000:02:00.0/dvb/dvb0.frontend0':
KERNEL=="dvb0.frontend0"
SUBSYSTEM=="dvb"
DRIVER==""
VDR-test-cellar (SDB1): udevadm info --query=all
--name=/dev/dvb/adapter2/frontend0 --attribute-walk
looking at device
'/devices/pci0000:00/0000:00:0d.0/0000:02:00.0/dvb/dvb2.frontend0':
KERNEL=="dvb2.frontend0"
SUBSYSTEM=="dvb"
DRIVER==""
VDR-test-cellar (SDB1): udevadm info --query=all
--name=/dev/dvb/adapter3/frontend0 --attribute-walk
looking at device
'/devices/pci0000:00/0000:00:06.0/0000:01:06.0/dvb/dvb3.frontend0':
KERNEL=="dvb3.frontend0"
SUBSYSTEM=="dvb"
DRIVER==""
VDR-test-cellar (SDB1): udevadm info --query=all
--name=/dev/dvb/adapter4/frontend0 --attribute-walk
looking at device
'/devices/pci0000:00/0000:00:0d.0/0000:02:00.0/dvb/dvb4.frontend0':
KERNEL=="dvb4.frontend0"
SUBSYSTEM=="dvb"
DRIVER==""
At the moment I cannot find anything to identify the 4
Tuners on the Cine S2, the FF on 01:06 is easy.
I got hit by tuning problems a few days ago as the tuner
without a cable was given FE3/0. The FF got FE4/0
at that time. I'm wondering if the DDBridge driver will
always number in the correct order.
So I guess I'll try to make the FF FE0/0, and hope that
the DDBRidge driver will do the rest.
Cheers Brian
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi,
well Its exactly what I was doing, and I cant see a
difference. Here an example of two of the Cine S2 Tuners:
VDR-test-cellar (SDB1): udevadm info -a -p $(udevadm info -q
path -n /dev/dvb/adapter3/frontend0)
Udevadm info starts with the device specified by the devpath
and then
walks up the chain of parent devices. It prints for every
device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the
device
and the attributes from one single parent device.
looking at device
'/devices/pci0000:00/0000:00:0d.0/0000:02:00.0/dvb/dvb3.frontend0':
KERNEL=="dvb3.frontend0"
SUBSYSTEM=="dvb"
DRIVER==""
looking at parent device
'/devices/pci0000:00/0000:00:0d.0/0000:02:00.0':
KERNELS=="0000:02:00.0"
SUBSYSTEMS=="pci"
DRIVERS=="DDBridge"
ATTRS{irq}=="16"
ATTRS{subsystem_vendor}=="0xdd01"
ATTRS{broken_parity_status}=="0"
ATTRS{class}=="0x048000"
ATTRS{consistent_dma_mask_bits}=="32"
ATTRS{dma_mask_bits}=="32"
ATTRS{local_cpus}=="ff"
ATTRS{device}=="0x0003"
ATTRS{enable}=="1"
ATTRS{msi_bus}==""
ATTRS{local_cpulist}=="0-7"
ATTRS{vendor}=="0xdd01"
ATTRS{subsystem_device}=="0x0020"
looking at parent device '/devices/pci0000:00/0000:00:0d.0':
KERNELS=="0000:00:0d.0"
SUBSYSTEMS=="pci"
DRIVERS=="pcieport"
ATTRS{irq}=="40"
ATTRS{subsystem_vendor}=="0x10de"
ATTRS{broken_parity_status}=="0"
ATTRS{class}=="0x060400"
ATTRS{consistent_dma_mask_bits}=="32"
ATTRS{dma_mask_bits}=="32"
ATTRS{local_cpus}=="ff"
ATTRS{device}=="0x0378"
ATTRS{enable}=="2"
ATTRS{msi_bus}=="1"
ATTRS{local_cpulist}=="0-7"
ATTRS{vendor}=="0x10de"
ATTRS{subsystem_device}=="0x0000"
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""
VDR-test-cellar (SDB1): udevadm info -a -p $(udevadm info -q
path -n /dev/dvb/adapter4/frontend0)
Udevadm info starts with the device specified by the devpath
and then
walks up the chain of parent devices. It prints for every
device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the
device
and the attributes from one single parent device.
looking at device
'/devices/pci0000:00/0000:00:0d.0/0000:02:00.0/dvb/dvb4.frontend0':
KERNEL=="dvb4.frontend0"
SUBSYSTEM=="dvb"
DRIVER==""
looking at parent device
'/devices/pci0000:00/0000:00:0d.0/0000:02:00.0':
KERNELS=="0000:02:00.0"
SUBSYSTEMS=="pci"
DRIVERS=="DDBridge"
ATTRS{irq}=="16"
ATTRS{subsystem_vendor}=="0xdd01"
ATTRS{broken_parity_status}=="0"
ATTRS{class}=="0x048000"
ATTRS{consistent_dma_mask_bits}=="32"
ATTRS{dma_mask_bits}=="32"
ATTRS{local_cpus}=="ff"
ATTRS{device}=="0x0003"
ATTRS{enable}=="1"
ATTRS{msi_bus}==""
ATTRS{local_cpulist}=="0-7"
ATTRS{vendor}=="0xdd01"
ATTRS{subsystem_device}=="0x0020"
looking at parent device '/devices/pci0000:00/0000:00:0d.0':
KERNELS=="0000:00:0d.0"
SUBSYSTEMS=="pci"
DRIVERS=="pcieport"
ATTRS{irq}=="40"
ATTRS{subsystem_vendor}=="0x10de"
ATTRS{broken_parity_status}=="0"
ATTRS{class}=="0x060400"
ATTRS{consistent_dma_mask_bits}=="32"
ATTRS{dma_mask_bits}=="32"
ATTRS{local_cpus}=="ff"
ATTRS{device}=="0x0378"
ATTRS{enable}=="2"
ATTRS{msi_bus}=="1"
ATTRS{local_cpulist}=="0-7"
ATTRS{vendor}=="0x10de"
ATTRS{subsystem_device}=="0x0000"
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""
In this case, you can write an external program witch output the
name when you match a front end of ddbridge :
KERNEL=="dvb[0-9]*.frontend0", SUBSYSTEMS=="pci",
DRIVERS=="DDBridge", PROGRAM="/your/program %k", NAME="%c"
Something like :
if [ ! -a /path/frontendname1 ]; then echo frontendname1; exit;
fi;
same with frontendname2 and frontendname3
The kernel name of the device is available if needed (%k in the
udev rule).
Marc.
Hi Marc,
you've lost me.
If FE0/0 is a DDBridge tuner, and I make the FF card tuner FE0/0,
then I still need to rename the DDBridge Tuner that
was FE0/0 to another one within FE{1-3}/0. That means potentially
overwriting the names of some of the other DDBridge
tuners, and then renaming them later on too.
Unfortunately the same rule will pop for all four DDBridge tuners,
so I guess I must keep track of what I have already renamed.
Or I'm missing something about the logic to be used here.
Take this example:
Aug 11 11:09:31 localhost vdr: [936] frontend 0/0 provides
DVB-S,DVB-S2,DSS with QPSK ("STV090x Multistandard")
Aug 11 11:09:31 localhost vdr: [936] frontend 1/0 provides DVB-C
with QAM16,QAM32,QAM64,QAM128,QAM256 ("ST STV0297 DVB-C")
Aug 11 11:09:31 localhost vdr: [936] frontend 2/0 provides
DVB-S,DVB-S2,DSS with QPSK ("STV090x Multistandard")
Aug 11 11:09:31 localhost vdr: [936] frontend 4/0 provides
DVB-S,DVB-S2,DSS with QPSK ("STV090x Multistandard")
1. Rename FE1/0 to FE0/0
2. Rename FE0/0 .... I'm renaming the PCI device so it should
rename the "Old" FE0/0 to FE 1/0
3. Rename FE2/0 to FE2/0. Should be OK, actually renaming the
third DVB device to FE2/0.
4. Rename fourth DVB device to FE3/0
In this case the FF could be in any position
Cheers Brian
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Or, hows about I just go in and rename the devices, same scheme
every time. I think that would work if I knew
how to differentiate between the 4 Cine S2 tuners, currently I dont
know how to do that.
Cheers Brian
|
