Hello Pasi, Tuesday, June 26, 2012, 3:13:52 PM, you wrote: PK> Well, paste the errors. First error messages are the most important. Here come the details. I didn't want to put all the details in my initial E-mail, because I thought there is a good chance that there is a simple solution to my problem... First, I checked if the standard kernel supports my TerraTec Cinergy C DVB-C. It doesn't! So I tried to install the s2-liplianin package without success. There were a lot of compiling errors. After reading through many installation guides, I learned that the the drivers expect a small patch to avoid the "compilation error in ir-sysfs.c because of missing skip_spaces() function" error. the drivers compiled and installed fine after this patch. ---8<--- Jun 24 19:58:05 xx kernel: Mantis 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jun 24 19:58:05 xx kernel: irq: 16, latency: 64 Jun 24 19:58:05 xx kernel: memory: 0xfafff000, mmio: 0xffffc900118da000 Jun 24 19:58:05 xx kernel: found a VP-2040 PCI DVB-C device on (05:00.0), Jun 24 19:58:05 xx kernel: Mantis Rev 1 [153b:1178], irq: 16, latency: 64 Jun 24 19:58:05 xx kernel: memory: 0xfafff000, mmio: 0xffffc900118da000 Jun 24 19:58:05 xx kernel: MAC Address=[00:08:ca:1d:3c:4e] Jun 24 19:58:05 xx kernel: mantis_alloc_buffers (0): DMA=0x37840000 cpu=0xffff880037840000 size=65536 Jun 24 19:58:05 xx kernel: mantis_alloc_buffers (0): RISC=0x37837000 cpu=0xffff880037837000 size=1000 Jun 24 19:58:05 xx kernel: DVB: registering new adapter (Mantis dvb adapter) Jun 24 19:58:05 xx kernel: rc_core: exports duplicate symbol ir_raw_handler_unregister (owned by ir_core) Jun 24 19:58:05 xx kernel: rc_core: exports duplicate symbol ir_raw_handler_unregister (owned by ir_core) Jun 24 19:58:05 xx kernel: rc_core: exports duplicate symbol ir_raw_handler_unregister (owned by ir_core) Jun 24 19:58:05 xx kernel: rc_core: exports duplicate symbol ir_raw_handler_unregister (owned by ir_core) Jun 24 19:58:05 xx kernel: rc_core: exports duplicate symbol ir_raw_handler_unregister (owned by ir_core) Jun 24 19:58:05 xx kernel: mantis_frontend_init (0): Probing for CU1216 (DVB-C) Jun 24 19:58:05 xx kernel: TDA10023: i2c-addr = 0x0c, id = 0x7d Jun 24 19:58:05 xx kernel: mantis_frontend_init (0): found Philips CU1216 DVB-C frontend (TDA10023) @ 0x0c Jun 24 19:58:05 xx kernel: mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach success Jun 24 19:58:05 xx kernel: DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)... Jun 24 19:58:05 xx kernel: mantis_ca_init (0): Registering EN50221 device Jun 24 19:58:05 xx kernel: mantis_ca_init (0): Registered EN50221 device Jun 24 19:58:05 xx kernel: mantis_hif_init (0): Adapter(0) Initializing Mantis Host Interface Jun 24 19:58:05 xx kernel: Registered IR keymap rc-vp2040 Jun 24 19:58:05 xx kernel: input: Mantis VP-2040 IR Receiver as /devices/virtual/rc/rc0/input3 Jun 24 19:58:05 xx kernel: rc0: Mantis VP-2040 IR Receiver as /devices/virtual/rc/rc0 ---8<--- Next step was to download vdr-1.6.0 and try to "make" it. This failed with the error message ---8--- In file included from audio.c:12: dvbdevice.h:19:2: error: #error VDR requires Linux DVB driver API version 3! ---8<--- I noticed that the most recent vdr-1.7.28 expects the API-version 5.3, so I looked for an intermediate version of vdr-1.7 and found vdr.1.7.22 that only looks for the API version 5. "make" with this version resulted in a lot of errors. ---8<--- Package freetype2 was not found in the pkg-config search path. Perhaps you should add the directory containing `freetype2.pc' to the PKG_CONFIG_PATH environment variable No package 'freetype2' found Package fontconfig was not found in the pkg-config search path. Perhaps you should add the directory containing `fontconfig.pc' to the PKG_CONFIG_PATH environment variable No package 'fontconfig' found font.c:19:10: error: #include expects "FILENAME" or <FILENAME> make: *** Deleting file `.dependencies' Package freetype2 was not found in the pkg-config search path. Perhaps you should add the directory containing `freetype2.pc' to the PKG_CONFIG_PATH environment variable No package 'freetype2' found Package fontconfig was not found in the pkg-config search path. Perhaps you should add the directory containing `fontconfig.pc' to the PKG_CONFIG_PATH environment variable No package 'fontconfig' found ---8<--- and many more compiling errors in font.c. The package fontconfig-2.8.0-3.el6.x86_64 is installed, but I cannot find a package "freetype2", so I am stuck now. Any idea? -- Best regards, Michael mailto:Michael.S.Schumacher@xxxxxx _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
