Sorry - on SuSE it is german...
On 05/06/12 17:11, Thorsten_Stuppi wrote:
> Hi,
>
> this solution worked on my SuSE-System after updating xine-lib. So far,
> so good. However, on my Debian-System I did update xine-lib as well
> (without any harder problems) . Then I edited /.xine/config as discribed
> below. But Xine seems not to react on this entry. I can see that config
> is written each time I enter Xine-Setup at runtime, but in the
> Setup-Window ("Engine") there is no entry saying "Priority for
> vdpau_264_alter decoder".
> In consequence, xine does not use this alternative decoder...
> Hm, as I said, on the SuSE-System everything is fine...
> The only difference, as far as I can see, is that on Debian xine gui
> language is english, on the Debian System it is english.
>
> Any ideas?
> Thorsten
>
> On 05/01/12 21:18, Reinhard Nissl wrote:
>> Hi,
>>
>> Am 01.05.2012 20:08, schrieb Harald Milz:
>>
>>> I just added the new ZDF HD channels (ZDF, KIKA, ZDF neo, kultur and
>>> info) and
>>> I get strange effects like the ones described in
>>> http://www.heise.de/newsticker/meldung/Neue-HDTV-Sender-Ruckler-auf-bestimmten-Receivern-1564225.html.
>>>
>>> It looks as if the color pallette switched every 0.7 s. This didn't
>>> happen
>>> with the old ZDF HD channel. My setup is unchanged. Other HD channels
>>> are not
>>> affected.
>>>
>>> Did anyone else observe this, and what can we do to fix this?
>>
>> You didn't mention your setup in detail, but I assume you're using a
>> xine-lib VDPAU based solution.
>>
>> In my vdr-xine setup I had to switch from vdpau_h264 to vdpau_h264_alter
>> decoder. The following lines from ~/.xine/config give vdpau_h264_alter a
>> higher priority:
>>
>> # priority for vdpau_h264 decoder
>> # numeric, default: 0
>> #engine.decoder_priorities.vdpau_h264:0
>>
>> # priority for vdpau_h264_alter decoder
>> # numeric, default: 0
>> engine.decoder_priorities.vdpau_h264_alter:1
>>
>> Bye.
>
--
Thorsten Stuppi
Dipl.-Ing. Nachrichtentechnik
Ingenieurbuero Stuppi
Wueppelser Altendeich 14
D-26434 Wangerland
Phone: +49 (0) 44 25 - 96 91 11
GSM: +49 (0) 160 - 4 22 83 95
FAX: +49 (0) 180 - 35 51 86 99 86
EMail: info@xxxxxxxxxxxxxxxxxxxxx
Site: http://www.stuppi-engineering.de
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
