On 29-02-12 12:44, Kende wrote:
On Wed, Feb 29, 2012 at 12:18:00PM +0100, Klaus Schmidinger wrote:
On 29.02.2012 12:13, Heikki Manninen wrote:
I have a number of different Conax CAM modules from different manufacturers and all of them disappear from VDR after a couple of days running. Hitting CAM reset on the CI menu will bring it back "online". Naturally all Conax channel recordings will fail silently as a result of this until the CAM has been brought back up. Switching to an encrypted channel just gives the standard "channel not available" message.
This happens (for me) with Satelco DVB-C card with Satelco CI. From what I understand, this seems to be a common problem though I'm not sure whether it is limited to Satelco devices only.
Would it be possible to force CAM reset on all CI slots when VDR is trying to start recording non-FTA channel?
Wouldn't it be better to fix the actual problem and prevent
the CAM from "disappearing"?
Hola,
For me this seems to be driver issue, not VDRs fault. CI poll ioctl write seems to fail sometimes with my KNC One (saa7146) budget cards . Following patch seems to help in my case:
Just a 'me too', My TT DVB-T 1500 with CI and conax cam also
occasionally crashes. FTA remain working and a reset in the cam menu
brings back the cam to life. Happens maybe once every few days, but my
tv-box doesn't stay on for days, 3-8 hours a day max.
--- dvbci.c 2007-01-04 14:49:10.000000000 +0200
+++ ../vdr-1.7.21/dvbci.c 2011-10-12 10:49:45.689684447 +0300
@@ -62,8 +62,10 @@
void cDvbCiAdapter::Write(const uint8_t *Buffer, int Length)
{
if (Buffer&& Length> 0) {
- if (safe_write(fd, Buffer, Length) != Length)
+ if (safe_write(fd, Buffer, Length) != Length) {
esyslog("ERROR: can't write to CI adapter on device %d: %m", device->De
viceNumber());
+ Reset(device->DeviceNumber());
+ }
}
}
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr