Ah, I use a lirc based remote and don't learn anything. I've just told VDR, that my VDR_RED is LIRC_RED etc, so when I press the red button, the action that is bound to VDR_RED is executed, regardless of the location of the button. This patch only changes the OSD location of the button, to match the location on the remote. On 03/31/11 15:40, Rainer Blickle wrote: > 2011/3/30 Steffen Barszus <steffenbpunkt@xxxxxxxxxxxxxx>: >> 2011/3/30 Oliver Schinagl <oliver@xxxxxxxxxxx>: >>> I belive that is exactly only what this patch does, it changes the >>> positions on the screen for the ST-NG theme I think (it's been a while I >>> admit). >>> >>> So if VDR is told that the red button performs the job of the red >>> button, then everything is ok. >>> >>> To recap, the problem I had with VDR that caused me to write this patch, >>> was: >>> >>> My Remote control had 2 buttons different from where VDR expected the >>> buttons to be. E.g. VDR wants Red Yellow Green Blue, but my remote >>> control was Red Yellow Blue Green. > My remote has the color order Yellow, Red, Blue, Green (only an > example, i dont have the remote at hand). Lets say the buttons are > Button0, Button1, Button2, Button3 > > When learning, vdr wants the keys Red,Yellow, Green, Blue to get pressed. > > In the vdr layout Button0 is Red, Button1 is Yellow and so on ... > while watching a recording vdr jumps 1 minute in the past when > pressing yellow and one minute in the future when pressing green. > These are the "middle" color buttons. > > I also wanted to have this functionality in the "middle" buttons (on > the buttons 1 and 2). > > So i pressed the Buttons Yellow, Red, Blue, Green while learning > Red,Yellow, Green, Blue. Then i have the jumping +/-1 Minute > functionality still on the middle color buttons. > > The only thing left is that the color on the osd has to be adjusted, > but not the positions of the text on it. If have dont this by > modifying your patch (the texts for ->DrawText are taken directly from > the parameters, not from the mapping). > > My (and perhaps only my) opinion is that vdr should request the > leftmost color button, then the color right next to it (and so on) > while learning. The color displayed in the osd should be assigned via > the setup menu. > > @Klaus: If there is a change to integrate this into the vdr, i would > provide a patch for it. > > > > >>> So in the end, this patch works for you and does what you want? Or is >>> your remote layed out as VDR expects it? >> I would say better "patch" your remote. A sharp knife and a >> screwdriver might be quite effective and will fix the problem also for >> the next vdr releases ^^ > This would be a real good solution, but i dont want to void my warranty :-) > >> SCNR >> >> Steffen >> >> _______________________________________________ >> vdr mailing list >> vdr@xxxxxxxxxxx >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr >> > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
