On 01/28/11 20:44, Timothy D. Lenz wrote: > I can't try it atm because a relay went bad in my rotor. Only goes one > direction. But looking at the patch, you put the user location in the > patch, not the conf? > > On 1/28/2011 7:40 AM, Ales Jurik wrote: >> Hi, >> >> after some time I've improved the gotox patch for vdr - it is now >> correctly resolving condition for sending diseqc command in >> cDvbTuner::SetFrontend(void) even if diseqc command doesn't change also >> with cascaded diseqc switches. So the diseqc is now sent immediately >> after channel switch and not after frontend tuning is timeouted. >> >> It was tested with diseqc.conf entries like this (cascaded: motor<-> >> uncommitted switch<-> committed switch): >> >> S1.0W 11700 V 9750 t V G [E0 10 39 F1] v W30 [E0 10 38 FC] W30 v t >> S1.0W 99999 V 10600 t V G [E0 10 39 F1] v W30 [E0 10 38 FD] W30 v T >> S1.0W 11700 H 9750 t V G [E0 10 39 F1] V W30 [E0 10 38 FE] W30 V t >> S1.0W 99999 H 10600 t V G [E0 10 39 F1] V W30 [E0 10 38 FF] W30 V T >> >> S9.0E 11700 V 9750 t V G [E0 10 39 F1] v W30 [E0 10 38 FC] W30 v t >> S9.0E 99999 V 10600 t V G [E0 10 39 F1] v W30 [E0 10 38 FD] W30 v T >> S9.0E 11700 H 9750 t V G [E0 10 39 F1] V W30 [E0 10 38 FE] W30 V t >> S9.0E 99999 H 10600 t V G [E0 10 39 F1] V W30 [E0 10 38 FF] W30 V T >> >> >> BR, >> >> Ales >> >> >> >> _______________________________________________ >> vdr mailing list >> vdr@xxxxxxxxxxx >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > No, all parameters are in setup.conf. If you mean initial values, they are in this patch from the first version (http://www.linuxtv.org/pipermail/vdr/2008-March/016164.html). If this is a problem in next version I'll zero it :) . You also could see that all parameters are in config file if you take a look more down in the patch in place where file menu.c is used. BR, Ales _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
