Hello, Steffen Barszus wrote: > As already said. Start a second vdr instance , using streamdev server > and client for the dvb devices, and xineliboutput as output, start the > plugins you want for the client on that instance. and you are done. OK - I'll try that on my next bigger sparetime slot ;) When I setup my HD-vdr, I was not able to get streamdev running. > you did not say anything about your installation, so help on this is > impossible. Well - this thread has already become very OT, but ok: my setup is: Vdr-Backend: CPU: single-core Athlon 2500 reduced to 1900 MB: Gigabyte GA7N400S dvb: FF from Hauppauge, Budget from Mystique vdr: 1.7.16 from e-tobi with ACPI wakeup os: debian squeeze hd: removable for recordings net: gigabit TV: connected to FF AV: connected to FF via SP/DIF-Opto-converter Vdr-Frontend (my desktop): CPU: Phenom II X4 965 MB: Gigabyte GA-880GM-UD2H os: debian squeeze net: gigabit Monitor: 60Hz standard I start the frontend with this script (as mentioned earlier - I don't have a vdr installation at that machine): --- <snip> --- #!/bin/bash # name of vdr-host vdr='vdr' # options for xine postprocessing post='tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1' # options: tcp | udp transport='tcp' # options: sxfe | fbfe display='sxfe' vdr-$display --width=1200 --height=720 --buffers=5000 --post $post xvdr:TCP://$vdr:37890 --$transport --- <snap> --- kind regards Gero _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
