hello Klaus,
I tried the patch below with a knc1 dvb-c, tt c1500 and tt connect ct-3650
I used a alphacrypt light and I also tried the classic module
always the same behavior - if I zap from encrypted channel to encrypted
channel in some situations vdr says "channel not available"
if I reset the cam manually it works again immediately
I also tried vdr 1.4 with my old tt ff c2300 and I had no problems
maybe its a general vdr 1.7.x cam handling problem
any idea - what I can do or test to identify where the problem is?
thanks
I had assumed this was due to some problem with CAM keys from the provider
expiring, or something. I still intermittantly get "channel not available",
but haven't found any way to recreate the problem at will.
I also occasionally have a CAM crash - where the status in goes from
"ALPHACRYPT" to "CAM PRESENT" or "CAM READY". A manual reset (or multiple)
fixes this, but I get no decryption during a "crash".
...problems I've had to live with for months. Gave up asking and installed
an FTA satellite dish for 50% of my mostly watched channels.
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr