> thx Goga, this at least helped to find out what is not working. I always used gotox not gotoposition. > When I choose goto position, this method is working, but gotox is not. fine i didn't test goto x > there one thing that's really wierd. After I changed rotor.conf like you suggested (before I had a 0 for > all positions, as I used gotox), I can see that toggling the satellite list is actually working, but > there's no name after it. > > in earlier vdr version it looked like: > Position: 2 S28.2E - Astra 2D/A/B > > no only this is left: > Position: 2 > > is satellite name displayed in your rotor plugin? the same as you described - no any satellite name also manual scan doesn't work Goag > > kind regards and thank you for you help > > > Newsy > > --- Goga777 <goga777@xxxxx> schrieb am Sa, 27.3.2010: > > > Von: Goga777 <goga777@xxxxx> > > Betreff: Re: reelchannelscan & rotor plugin don't compile with vdr 1.7.13 > > An: vdr@xxxxxxxxxxx > > Datum: Samstag, 27. März, 2010 20:33 Uhr > > Приветствую, Newsy > > > anybody got vdr 1.7.14 working with rotor plugin + > > this patch. It's compiling without any probs but when > > > I go to rotor menu I cannot select satellite, there > > always "position: 0" and it can't be toggled. > > > > > > do you have /etc/vdr/plugins/rotor.conf with filled > > positions like this > > > > S5.0E = 0 > > S7.0E = 0 > > S9.0E = 9 > > S10.0E = 0 > > S13.0E = 13 > > S16.0E = 0 > > S19.2E = 19 > > S28.2E = 0 > > S28.5E = 0 > > S36.0E = 36 > > S39.0E = 39 _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
