On Wed, 2010-02-10 at 11:18 +0200, Rolf Ahrenberg wrote:
> On Tue, 9 Feb 2010, L. Hanisch wrote:
>
> > I received your sample and it looks like a valid TS with PAT, PMT and PCR,
> > so the plugin has nothing else to do as to pass it through to the vdr
> > (hopefully).
>
> In the meanwhile, one could also try out the IPTV plugin without any
> ffmpeg hassle by using a script that tunes the device and then simply:
>
> cat /dev/video0 | nc -u -p ${PORT} 127.0.0.1
Most of this is extra debug output, but I've never used the nc command.
The port number looks to be the same as ffmpeg would use.. The only
thing that may be different is there is no packet size specified..
Getting new URL
/dev/video0
Change Channel to 951 on Cable Box
starting with node: 1
node 1: vendor_id = 0x000024a0 model_id = 0x0000ea05
AV/C Command: 951 = Op1=0x00487C29 Op2=0x00487C25 Op3=0x00487C21
Streamsvideo.sh PID is 32604
Streamdev Plugin 951 /dev/video0
nc -u -p 4321 127.0.0.1
no port[s] to connect to
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
