updating nvidia drivers to 195 (from 184) helped..
Now I can use 'vdr-sxfe --video=vdpau', however xine cannot connect directly to vdr, says that there is no plugin to support vdr format.. :-/
--
Jussi Jaaskelainen
http://www.jjussi.com
Marie von Ebner-Eschenbach - "Even a stopped clock is right twice a day."
2010/1/23 Petri Helin <phelin@xxxxxxxxxxxxxx>
On Sat, Jan 23, 2010 at 11:59 AM, Jussi J <vdr@xxxxxxxxxx> wrote:AFAIK xine-plugin normally refers to vdr-xine, but I think you mean
> Hi!
> I have "nVidia Corporation G96 [GeForce 9400 GT] (rev a1)" what is VDPAU
> capable. I have loaded xine-plugin and try to use vdr-sxfe in vdpau mode,
> but no success..
xineliboutput, since you also mention vdr-sxfe.
Check the following:
>
> Any ideas where problem lies?
1. Make sure you have a xine-lib which supports vdpau. Since you seem
to be using xine-lib 1.2, it might be best to get the current hg in
case you haven't yet.
2. Make sure you have everything installed from nvidia drivers pov.
The simplest choice is to install manually the driver which nvidia
provides on their web page. But if you use a distribution package,
make sure you install the vdpau library as well.
3. Check that you have configured xineliboutput with vdpau enabled.
If you do all of the above steps properly, you should have no problems
with vdpau.
-Petri
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
