On Sat, Jan 23, 2010 at 11:59 AM, Jussi J <vdr@xxxxxxxxxx> wrote: > Hi! > I have "nVidia Corporation G96 [GeForce 9400 GT] (rev a1)" what is VDPAU > capable. I have loaded xine-plugin and try to use vdr-sxfe in vdpau mode, > but no success.. AFAIK xine-plugin normally refers to vdr-xine, but I think you mean xineliboutput, since you also mention vdr-sxfe. > > Any ideas where problem lies? Check the following: 1. Make sure you have a xine-lib which supports vdpau. Since you seem to be using xine-lib 1.2, it might be best to get the current hg in case you haven't yet. 2. Make sure you have everything installed from nvidia drivers pov. The simplest choice is to install manually the driver which nvidia provides on their web page. But if you use a distribution package, make sure you install the vdpau library as well. 3. Check that you have configured xineliboutput with vdpau enabled. If you do all of the above steps properly, you should have no problems with vdpau. -Petri _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr