Am Sonntag, den 22.11.2009, 13:34 +0100 schrieb Klaus Schmidinger: > On 18.11.2009 08:40, Falk Spitzberg wrote: > > Hello, > > > > With VDR 1.7.9 i often notice that VDR switches the live TV to a > > different receiver card, when a timer starts recording, although the > > second card is available. This causes a short interrupt in live TV. > > > > My system has two DVB cards, an old FF and a Tevii S470, and an eHD. > > > > Sample situation 1: the only activity is live TV on ZDF. Now a timer > > starts recording from RTL 2, which interrupts the live program for a > > short moment. > > > > Sample situation 2: the only activity is live TV on RTL. Now a timer > > starts recording from RTL 2. Nothing happens, because VDR correctly > > shares the transponder with live TV. > > > > I would understand when VDR switches live TV from the DVB-S2 card to the > > DVB-S card when it needs to tune a different transponder for a DVB-S2 > > recording, but since it can do DVB-S recordings from any card, there is > > no reason to switch live TV for such recordings. > > When recording, VDR tries to preserve devices that provide multiple > delivery systems: > > imp <<= 2; imp |= GetClippedNumProvidedSystems(2, device[i]) - 1; // avoid cards which support multiple delivery systems Then it would be a good idea to prefer those cards for live view. > > See device.c, cDevice *cDevice::GetDevice(const cChannel *Channel, int Priority, bool LiveView). > > Klaus > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr -- Falk Spitzberg Tel: +49 5242 901626 E-Mail: post@xxxxxxxxxxxx _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
