On Mon, 10 Aug 2009 08:50:47 +1200 "Simon Baxter" <linuxtv@xxxxxxxxxxxxx> wrote: > > I've found a big problem: VDR can't use both my DVB cards at once. > > They're both Hauppauge cards using the saa7146 module (I'm not sure if > > they both use the budget* modules though), but one is DVB-S and one is > > DVB-T. I expect it's because they're both based on the same chipset > > that's confusing VDR. Is there a fix available? I'm using 1.6.0-11 from > > Debian, patched for Freesat and rebuilt, but I'm willing to try 1.7.* if > > that's what it takes. > > What does your channels.conf look like? > > Sounds odd - I'm using the saa7146 driver on 2 cards (although both > Technotrend) I'm not so sure I'm having this problem after all. I just tried watching a DVB-T channel while recording DVB-S and it worked OK. I definitely have had problems while trying to watch/record two channels at once, and that's been going on for some time before I became aware of the problem with the Freeview EPG. I might have accidentally been selecting two channels on the same card in vdradmin, although until this EPG problem made it stop listing the Freeview ones I thought it was reasonably easy to tell the difference because all the Freeview ones came first, followed by Freesat, starting with BBC 1 South (and the first 3 channels being named differently on DVB-S from DVB-T because of their regions is another helpful clue). -- TH * http://www.realh.co.uk _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
