I've found a big problem: VDR can't use both my DVB cards at once.
They're both Hauppauge cards using the saa7146 module (I'm not sure if
they both use the budget* modules though), but one is DVB-S and one is
DVB-T. I expect it's because they're both based on the same chipset
that's confusing VDR. Is there a fix available? I'm using 1.6.0-11 from
Debian, patched for Freesat and rebuilt, but I'm willing to try 1.7.* if
that's what it takes.
What does your channels.conf look like?
Sounds odd - I'm using the saa7146 driver on 2 cards (although both
Technotrend)
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
