On 05/03/09 10:06, martinez@xxxxxxx wrote: > Using VDR 1.7.6 > > 1) On 7 East, there are hannels with two audio shown as TUR, and ORJ > (Tur for Turkish and Orj for original language) Default audio is Tur and in the > OSD settings it is not possible to give Orj a higher priority as it is not in > the list of languages. Well, "orj" is not an actual language ;-) What you could try is to add "orj" to const char *LanguageCodeList[] in i18n.c and see if that helps. > 2)My diseqc.conf contains > S19.2E 11700 V 9750 t v W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 t > S19.2E 99999 V 10600 t v W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 T > S19.2E 11700 H 9750 t V W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 t > S19.2E 99999 H 10600 t V W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 T > > S13.0E 11700 V 9750 t v W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 t > S13.0E 99999 V 10600 t v W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 T > S13.0E 11700 H 9750 t V W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 t > S13.0E 99999 H 10600 t V W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 T > > and some more entries like that for other satellite positions > This diseqc command means > E0 - header > 31 - command for 1st rotor > 6B - Go to stored position > 01 - Position 1 > > The trouble is that VDR when idle for a while it starts moving the dish around, > probably to update the EPG or channel pids? This is a really nice feature with > Diseqc switches but not with rotors where it scares my wife when the dish moves > alone at 3 in the morning (and probably annoy my neightbours too) You can turn off the EPG scan by setting "EPG scan timeout" to 0. > So my humble request for Klaus: Diseq commands of type E0 31 6B or E0 31 6E (for > gotoX) should only be actually sent on channels zapping, not for idle tasks. VDR doesn't interpret the DiSEqC command codes. I guess with a rotor it's best to turn off the EPG scan altogether. Klaus _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
