Using VDR 1.7.6 1) On 7 East, there are hannels with two audio shown as TUR, and ORJ (Tur for Turkish and Orj for original language) Default audio is Tur and in the OSD settings it is not possible to give Orj a higher priority as it is not in the list of languages. 2)My diseqc.conf contains S19.2E 11700 V 9750 t v W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 t S19.2E 99999 V 10600 t v W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 T S19.2E 11700 H 9750 t V W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 t S19.2E 99999 H 10600 t V W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 T S13.0E 11700 V 9750 t v W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 t S13.0E 99999 V 10600 t v W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 T S13.0E 11700 H 9750 t V W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 t S13.0E 99999 H 10600 t V W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 T and some more entries like that for other satellite positions This diseqc command means E0 - header 31 - command for 1st rotor 6B - Go to stored position 01 - Position 1 The trouble is that VDR when idle for a while it starts moving the dish around, probably to update the EPG or channel pids? This is a really nice feature with Diseqc switches but not with rotors where it scares my wife when the dish moves alone at 3 in the morning (and probably annoy my neightbours too) So my humble request for Klaus: Diseq commands of type E0 31 6B or E0 31 6E (for gotoX) should only be actually sent on channels zapping, not for idle tasks. _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
