On 4/27/09, martinez@xxxxxxx <martinez@xxxxxxx> wrote: > To enable/disable GotoStoredPosition we would need a setting (on/off) > on the Diseqc setup menu <SNIP> IMHO, VDR needs multi satellite support bundled with it (via diseqc 1.2), which could be achieved either in the core, or as a bundled plugin. The plugin should: - 1) Set East/West limits 2) Drive the rotor east/west for tuning 3) Store sat locations at certain position numbers 4) Display signal strength etc 5) Allow scanning of DVB-S / S2 transponders and add these to VDR channel lists Mostly this is done by the rotor plugin, but it doesn't seem to be supported anymore. :-( Thanks, Morfsta _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
