To enable/disable GotoStoredPosition we would need a setting (on/off) on the Diseqc setup menu If on, then in diseqc.conf commands like are sent to the rotor: S19.2E 11700 V 9750 t W15 [E0 31 6B 01] W15 v t S19.2E 99999 V 10600 t W15 [E0 31 6B 01] W15 v T S19.2E 11700 H 9750 t W15 [E0 31 6B 01] W15 V t S19.2E 99999 H 10600 t W15 [E0 31 6B 01] W15 V T (the syntax is E0 header, 31 first rotor, 6B = gotostored position So If gotostoredposition is ON and the third byte of the diseqc 1.2 command is 6B then issue the command, otherwise block it _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
