Heinrich Langos wrote: > Moikka Antti, > >> vp7045 does not have PID-filters. >> I think difference comes from different USB-transfer settings. vp7045 >> uses BULK packet size 4096 and af9015 uses BULK packet size 512 for >> USB2.0 and BULK packet size 64 for USB1.1. Therefore af9015 sends 8 >> times more packets than vp7045 (I guess). >> >> One thing more you can test - use USB1.1. To force USB1.1 remove USB2.0 >> driver by rmmod ehci_hcd. After that plug af9015 stick and look from >> logs it detects USB1.1 and uses PID-filters. af9015 driver now uses >> smaller packet size for transfer that can change load (bigger?). > seems you are right. The transfer with PID filter in usb 1.1 causes > about 30% load in contrast to 19% with usb 2.0 > > is there a way to increase the packet size for those bulk transfers? > for usb 2.0? for 1.1? Actually AF9015 chip offers registers to configure packet size. But those which are now used are default ones and rather many devices (other than af9015) are using just same. That's why I am not sure if I want change those to bigger ones. I will make test version that uses 4k packets for your tests. If it resolves problem then we should consider for example adding module param for setting desirable packet size. I will inform you when test version is ready - It takes day or two. regards Antti -- http://palosaari.fi/ _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
