Sometimes when change channel I can see normal iptv aprox. 3 sec, but after still picture again... CPU load low. vdr: [5852] switching to channel 259 vdr: [5971] IPTV streamer thread ended (pid=5852, tid=5971) vdr: [5970] receiver on device 9 thread ended (pid=5852, tid=5970) vdr: [5981] receiver on device 9 thread started (pid=5852, tid=5981) vdr: [5982] IPTV streamer thread started (pid=5852, tid=5982) vdr: [5984] [softdevice-audio]: Xrun (at least 460.672 ms long) vdr: [5984] [softdevice-audio]: xrun vdr: [5983] [VideoOut] reset: sync info: repF = 1, drpF = 0, totF = 30 vdr: [5985] [VideoOut]: resolution changed: W(720 -> 720); H(432 ->576) vdr: [5985] [VideoOut]: aspect changed (0 -> 0 ; 1.777778 -> 1.333333) vdr: [5985] [VideoOut]: 720x576 [0,0 720x576] -> 720x576 [90,0 540x576] vdr: [5985] [dfb] (re)configuring Videolayer to 720 x 576 (720x576) vdr: [5985] [dfb] creating new surface (stretchBlit) vdr: [5985] [dfb] surface capabilities for (videoSurface): videoonly, interlaced, PixelFormat = 0x00200806 vdr: [5985] [dfb] (re)configured 0x00200806 vdr: [5984] [softdevice-audio]: Xrun (at least 78.842 ms long) vdr: [5984] [softdevice-audio]: xrun vdr: [5984] [softdevice-audio]: Xrun (at least 28.733 ms long) vdr: [5984] [softdevice-audio]: xrun vdr: [5981] changing pids of channel 259 from 501+501=2:502:0:0 to 501+501=0:502:0:0 vdr: [5852] retuning due to modification of channel 259 vdr: [5852] switching to channel 259 vdr: [5982] IPTV streamer thread ended (pid=5852, tid=5982) vdr: [5981] receiver on device 9 thread ended (pid=5852, tid=5981) vdr: [5986] receiver on device 9 thread started (pid=5852, tid=5986) vdr: [5987] IPTV streamer thread started (pid=5852, tid=5987) ----- Original Message ----- From: "Rolf Ahrenberg" <rahrenbe@xxxxxxxxx> To: "VDR Mailing List" <vdr@xxxxxxxxxxx> Sent: Thursday, March 05, 2009 2:33 AM Subject: Re: vdr-1.7.4 and iptv plugin > On Wed, 4 Mar 2009, ua0lnj wrote: > >> IPTV-0.2.4 plugin not works for me, I can see steel picture only, from >> time to time. >> But on info screen of plugin I can see stream's data. > > If you're using an external application (like vlc) to transcode the > video stream and you see only still pictures, you'll most likely need a > faster CPU. > > BR, > -- > rofa > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
