Приветствую, Klaus does your vdr-1.7.1-s2api.diff good for vdr 1.7.0 ? > The attached patch is what I've gathered from various postings> regarding adapting VDR to the S2API driver API (thanks to> Igor M. Liplianin, Niels Wagenaar and Edgar Hucek - did I forget anybody?).> > Since the S2SAPI doesn't provide a way of determining whether> a DVB-S device supports DVB-S2 (at least I didn't find any),> you need to apply the second attached patch to the driver> in order to impelement a new capability flag that reports> the availability of DVB-S2 support.> > If you don't want to patch the driver, you can change the line> > case FE_QPSK: frontendType = (frontendInfo.caps & FE_CAN_2ND_GEN_MODULATION) ? SYS_DVBS2 : SYS_DVBS; break;> > in dvbdevice.c to avoid FE_CAN_2ND_GEN_MODULATION. Either set frontendType permanently> to SYS_DVBS or SYS_DVBS2, depending on what you have.> > > So far DVB-S and DVB-S2 appears to tune fine.> DVB-C is completely untested.> With DVB-T tuning doesn't work, even though my TDA10046H based DVB-T card> does work with the S2API driver under VDR 1.6.0.> > So for the moment I would appreciate if people could test DVB-T> tuning and check whether maybe I made some silly mistake in the> DVB-T tuning code. _______________________________________________vdr mailing listvdr@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
