В сообщении от 6 December 2008 17:06:40 Klaus Schmidinger написал(а):> The attached patch is what I've gathered from various postings> regarding adapting VDR to the S2API driver API (thanks to> Igor M. Liplianin, Niels Wagenaar and Edgar Hucek - did I forget anybody?).>> Since the S2SAPI doesn't provide a way of determining whether> a DVB-S device supports DVB-S2 (at least I didn't find any),> you need to apply the second attached patch to the driver> in order to impelement a new capability flag that reports> the availability of DVB-S2 support.>> If you don't want to patch the driver, you can change the line>> case FE_QPSK: frontendType = (frontendInfo.caps &> FE_CAN_2ND_GEN_MODULATION) ? SYS_DVBS2 : SYS_DVBS; break;>> in dvbdevice.c to avoid FE_CAN_2ND_GEN_MODULATION. Either set frontendType> permanently to SYS_DVBS or SYS_DVBS2, depending on what you have.>>> So far DVB-S and DVB-S2 appears to tune fine.> DVB-C is completely untested.> With DVB-T tuning doesn't work, even though my TDA10046H based DVB-T card> does work with the S2API driver under VDR 1.6.0.>> So for the moment I would appreciate if people could test DVB-T> tuning and check whether maybe I made some silly mistake in the> DVB-T tuning code.>> Klaus Thank You for VDR.I really enjoy it. -- Igor M. Liplianin _______________________________________________vdr mailing listvdr@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
