On Sat, Dec 6, 2008 at 12:58 AM, VDR User <user.vdr@xxxxxxxxx> wrote:
On Fri, Dec 5, 2008 at 11:34 AM, Morfsta <morfsta@xxxxxxxxx> wrote:I agree. My channel changes are about 1 second regardless if I'm
> On Fri, Dec 5, 2008 at 11:05 AM, Alex Betis <alex.betis@xxxxxxxxx> wrote:
>> 2 channels on the same transponder - about 2 seconds - video and sound
>> playing right after the switch.
>> 2 channels on different transponders - about 4 seconds - sound is playing
>> right after the switch, image is shown, but start moving about 1 more second
>> later.
>
> Sounds long, I can channel change on DVB-T and DVB-S almost instantaneously.
>
> You can normally fix this by recompiling your kernel with low latency
> settings (timer frequency, kernel queuing methods etc) - normally
> selecting the best settings for a desktop helps.
switching on different transponders or lnbs.
You're saying that kernel provided by distributors (Fedora 10 in my case) is not tuned for desktops?
Interesting... Will try that after I'll try moving back to 1.7.0.
Thanks.
Interesting... Will try that after I'll try moving back to 1.7.0.
Thanks.
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
