> >>> in BITRATE field I can see only ---(6 Mbit/s)
> > I can see without any problem video/audio bitrate on the top right of OSD (that's why the bitrate is parsed at the
> > moment correctly) , but I don't see video/audio bitrate below in OSD
>
> Sorry, I don't quite get your explanation, but femon shows two different
> bitrates: one in the status window is always a calculated bitrate and in
> the bigger detailed information window there are both the nominal
> bitrate parsed from the video stream ("---" above) and the calculated
> one in brackets ("6 MBit/s" above). The calculated bitrate is always
> available if enabled in setup as it simply calculates the data rate of a
> selected pid in defined time period. The nominal bitrate is kind of
> maximum bitrate value as a hint for the decoder.
ok, I see.
btw - here's you can have a look on screenshots with femon 163 + vdr 170 + s2api patch + h264 patch
http://ag1455.nm.ru/VDR/176.png
http://ag1455.nm.ru/VDR/175.png
> > the same problem was described on our Russian-vdr forum from other vdr user. It wasn't happened on previous femon
> > versions. I will not be able to run vanilla vdr 170 because I have s2api drivers
>
> As I already told you, the femon doesn't support >= vdr-1.7.0 (yet), so
> does this hang happen also in the latest vdr-1.6.0 series?
no, with early femon and vdr version I didn't note this vdr hung up
Goga
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
