> > I have installed femon 163 with my vdr 170. There's some remarks concerning of h264 channels
> > no any information in CoderateH (I can see only ---)
>
> The plugin doesn't support multiproto/S2API and therefore channels using
> new coderates like "9/10" are shown as data invalid ("---").
ok, I will check with another fec
> > in BITRATE field I can see only ---(6 Mbit/s)
> > FRAME RATE - ---
> > Codec - H264
>
> I don't have any access to H.264 (or HE-AAC) streams so support for
> these are more like academic. The bitrate, framerate, and scan type
> aren't parsed at the moment as my blindly written code didn't worked
> right from the start. This particular piece of code was hidden behind
> #if pragmas in femonh264.c, so it would be nice, if someone could take a
> look at it and send be a patch.
--------------------------------------------------------------
|## Channel Name ########################## [AR][VF][A/DD][D]|
|[==== Signal Strength in % ==============|=================]|
|[==== Signal-to-Noise Ratio in % ========|=================]|
| STR: #0000 (0%) BER: #00000000 Video: 0 Mbit/s |
| SNR: #0000 (0%) UNC: #00000000 Audio: 0 kbit/s |
| [LOCK] [SIGNAL] [CARRIER] [VITERBI] [SYNC] |
--------------------------------------------------------------
I can see without any problem video/audio bitrate on the top right of OSD (that's why the bitrate is parsed at the
moment correctly) , but I don't see video/audio bitrate below in OSD
> > Audio stream #0 ()
> > Codec - ---
> > Channel Mode - ---
> > Bitrate - ---
> > Sampling Frequency - ---
>
> This looks also ok. Non-existent audio pid provides no stream
> information. I guess your channel contained only ac3 audio or no audio
> at all.
again - I can see without any problem video/audio bitrate on the top right of OSD (that's why the bitrate is parsed at the
moment correctly) , but I don't see video/audio bitrate below in OSD of femon
> > If I try to switch channel up/down with OSD femon menu my vdr will hang up
>
> I cannot reproduce this on my setup. Please, use vanilla (or _only_
> liemikuutio patched) VDR for testing. There 2 active femon users (me
> and my friend), so the testing has been quite light - at least I
> haven't got any bug/success reports from other users. :)
the same problem was described on our Russian-vdr forum from other vdr user. It wasn't happened on previous femon versions.
I will not be able to run vanilla vdr 170 because I have s2api drivers
Goga
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
