Hi, My Medion MD 4688 remote (from Aldi) has lost its codes because the batteries were dead :-( Obviously, I had not written the codes on the back label of the remote control. I have looked at this ML archives and found some codes (308, 336), but they are not working. I am not using LIRC, but the RC input of a WinTV DVB-S REV 1.3, and this is my remote.conf file : remote-event0._Setup /proc/av7110_ir 00008000 20 remote-event0.Up 0000000100010003 remote-event0.Down 0000000100010009 remote-event0.Menu 0000000100010004 remote-event0.Ok 0000000100010006 remote-event0.Back 000000010001000A remote-event0.Left 0000000100010005 remote-event0.Right 0000000100010007 remote-event0.Red 0000000100010001 remote-event0.Green 0000000100010002 remote-event0.Yellow 0000000100010023 remote-event0.Blue 000000010001000E remote-event0.0 000000010001001E remote-event0.1 0000000100010026 remote-event0.2 0000000100010027 remote-event0.3 0000000100010028 remote-event0.4 000000010001001A remote-event0.5 000000010001003E remote-event0.6 0000000100010017 remote-event0.7 0000000100010018 remote-event0.8 0000000100010019 remote-event0.9 000000010001002C remote-event0.Play 0000000100010031 remote-event0.Pause 000000010001003D remote-event0.Stop 0000000100010021 remote-event0.Record 0000000100010024 remote-event0.FastFwd 0000000100010037 remote-event0.FastRew 0000000100010036 remote-event0.Power 000000010001000D remote-event0.Channel+ 0000000100010035 remote-event0.Channel- 0000000100010034 remote-event0.User1 000000010001000C remote-event0.User2 0000000100010015 remote-event0.User3 000000010001003B remote-event0.User4 000000010001000B Any suggestions for the MD4688 code ? Thanks, Jean-Claude _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
