On 03/06/08 00:49, Timothy D. Lenz wrote: > Would it be possible to add support for the subchannel numbering system used > with ATSC? Exmple of the channels in our area: > > 4 KVOA > 4.1 KVOAD > 6 KUAT > 6.1 KUATD1 > 6.2 KUATK > 6.3 KUATV > 6.4 KUATC > 9 KGUN > 9.1 KGUND > 11 KMSB > 11.1 KMSBH > 13 KOLD > 13.1 KOLD-DT > 14 KUDF > 18 KTTU > 18.1 KTTUDT > 27 KUAS > 27.1 KUASHD > 34 KFTU > 38 KUVE > 40 KHRR > 40.1 KHRR-DT > 48 K48GX > 58 KWBA > 58.1 KWBA-DT > 58.2 LATV > > All the x.x channels are the new ATSC channels, rest are old NTSC most of > which, but not all, will be shut down in a year. For ATSC .1 is the primary > channel and .2, .3, etc are the sub channels. The "#" on the remote could > be used for the "." In the channels.conf an ATSC next channel number would > look like: > :@13.1 I don't like that dot notation. You could add a '0' to the old channels and leave out the '.', as in 40 KVOA 41 KVOAD 60 KUAT 61 KUATD1 62 KUATK 63 KUATV 64 KUATC 90 KGUN 91 KGUND Klaus _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
