Would it be possible to add support for the subchannel numbering system used with ATSC? Exmple of the channels in our area: 4 KVOA 4.1 KVOAD 6 KUAT 6.1 KUATD1 6.2 KUATK 6.3 KUATV 6.4 KUATC 9 KGUN 9.1 KGUND 11 KMSB 11.1 KMSBH 13 KOLD 13.1 KOLD-DT 14 KUDF 18 KTTU 18.1 KTTUDT 27 KUAS 27.1 KUASHD 34 KFTU 38 KUVE 40 KHRR 40.1 KHRR-DT 48 K48GX 58 KWBA 58.1 KWBA-DT 58.2 LATV All the x.x channels are the new ATSC channels, rest are old NTSC most of which, but not all, will be shut down in a year. For ATSC .1 is the primary channel and .2, .3, etc are the sub channels. The "#" on the remote could be used for the "." In the channels.conf an ATSC next channel number would look like: :@13.1 _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
