On Wednesday 05 of March 2008, Seppo Ingalsuo wrote: > I couldn't repeat that but I didn't find exactly that multiproto driver. Hi, I'm testing it with this one - http://jusst.de/hg/multiproto/archive/4df151d5b3fe.tar.bz2. I've only changed some print and debug options in my tests. > > But I noticed that zapping works reliably with between channels in > different positions with LNB tone off (frequency < 11700, if I got this > right...). V/H polarization didn't matter (13V or 18V LNB voltage). > There should be 15 ms tone off between DiSEqC messages and continuous > tone that might not happen with rotor plugin and this DVB driver. I > wonder if that could be the reason? > Yes, my fault - I've switched between satellites only on lower band. But with newest version of multiproto also this was not possible. But I'm using it with cascade switch/motor, so my tests could have different results. BR, Ales _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
