Hi, serge pecher schrieb: >> Jan 27 09:17:32 pccave vdr: [13657] switching to channel 1 >> Jan 27 09:17:32 pccave vdr: [13662] set DVB-S >> Jan 27 09:17:41 pccave vdr: [13662] frontend 0 timed out while tuning to channel 1, tp 110832 > > This one looks OK too. DVB-S channels shall be tuned on DVB-S > capable devices only, and as a last resort, on DVB-S2 devices. > But it looks like channel 1 is on ASTRA and therefore you'll get > a tuning timeout on device 1 (= /dev/dvb/adapter0; frontend 0 = > /dev/dvb/adapter0/frontend0) as it is connected to HOTBIRD. > > VDR currently assumes that all DVB-S(2) devices are able to > deliver all DVB-S(2) channels (actually, it's a bit more > complex). You'll need a special channel setup to bind channels to > certain devices. > > [serge pecher] I presume that this is what I have to do, because I would > like to look at the ASTRA channels with the DVB-S2 device. > How can I achieve that ? See man 5 vdr and have a look at "Conditional access": > 0001...000F explicitly requires the device with the given number Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:rnissl@xxxxxx _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
