Igor skrev:
@Per
can you write more detail HOWTO (my English is not so good, sorry)
I have started with a CVS xine-lib. Then applied the vdr-xine patch.
Download and apply the xine.patch from
http://code.google.com/p/coreavc-for-linux/
There are also some patches here to fix some problems with xine-lib:
http://dvbn.happysat.org/viewtopic.php?p=243997
Walery's patch to demux_mpeg_pes.c is attached. Apply that to.
Per
--- demux_mpeg_pes.c.org 2008-01-19 22:09:58.000000000 +0100
+++ demux_mpeg_pes.c 2008-01-19 22:10:02.000000000 +0100
@@ -1092,6 +1092,7 @@ static int32_t parse_private_stream_1(de
return this->packet_len + result;
}
+int sent_header = 0;
static int32_t parse_video_stream(demux_mpeg_pes_t *this, uint8_t *p, buf_element_t *buf) {
int32_t result;
uint32_t todo_length=0;
@@ -1136,6 +1137,7 @@ static int32_t parse_video_stream(demux_
an AUD has been found at the beginning of the payload.
*/
if (this->mpeg12_h264_detected < 2) {
+ sent_header = 0; /* Added by Mel */
uint8_t *pp = p + 2, *pp_limit = p + payload_size - 1;
while (0 < pp && pp < pp_limit) {
if (pp[0] == 0x01 && pp[-1] == 0x00 && pp[-2] == 0x00) {
@@ -1156,9 +1158,44 @@ static int32_t parse_video_stream(demux_
pp++;
pp = memchr(pp, 0x01, pp_limit - pp);
}
+ usleep(100);
lprintf("%s%c\n", (this->mpeg12_h264_detected & 1) ? "H.264" : "MPEG1/2", (this->mpeg12_h264_detected & 2) ? '!' : '?');
+
+
+
+ if (this->mpeg12_h264_detected == 3){
+ if (sent_header == 0) {
+ printf("INIT H264\n");
+ xine_bmiheader bih;
+ buf_element_t *buf = this->video_fifo->buffer_pool_alloc (this->video_fifo);
+ buf->decoder_flags = BUF_FLAG_STDHEADER;
+
+ memset(&bih, 0x00, sizeof(bih));
+ bih.biWidth = 1920;
+ bih.biHeight = 1080;
+ bih.biPlanes = 1;
+ bih.biBitCount = 24;
+ bih.biCompression = 0x34363248; //31435641; //AVC1
+ bih.biSizeImage = 0;
+ bih.biXPelsPerMeter=10000;
+ bih.biYPelsPerMeter=10000;
+ bih.biClrUsed=0;
+ bih.biClrImportant=0;
+ bih.biSize = sizeof(bih);
+ buf->content = malloc(sizeof(bih));
+ memcpy(buf->content, &bih, sizeof(bih));
+ //memcpy(buf->content, &bih, sizeof(bih));
+ buf->size = sizeof(bih);
+ buf->type = BUF_VIDEO_H264;
+ buf->decoder_flags |= BUF_FLAG_FRAME_END;
+ this->video_fifo->put (this->video_fifo, buf);
+ sent_header = 1;
+ buf = NULL;
+ }
}
+}
+
/* when an H.264 AUD is seen, we first need to tell the decoder that the
previous frame was complete.
*/
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
