Jouni Karvo wrote: > Antti Seppälä kirjoitti: > >> Try lowering the value of ABITRATE found in iptvstream.sh from 320 to >> e.g. 192. After such a modification the stream worked fine for me. >> >> > > Hi, > > this does not seem to help. > > I have three test channels now, all of which give the video: > > - The Albanian Rrokum TV - which gives also audio. > - Bahn TV - only video. Even with ab=192 > - BBC One premier (via http://www.global-itv.com/). Only video > > My xine has w32 (from xine's output: > load_plugins: plugin > /usr/local/lib/xine/plugins/1.1.9/xineplug_decode_w32dll.so found > ) > Since you have at least one channel which works it leads me to believe that iptv plugin is working and the problem could still be in the transcoding or playback process. Here's how you can try to investigate a bit more: Set up a vlc for transcoding in a similar fashion as to how iptv plugin uses it. For example the following command will do just that for Bahn TV: vlc mms://atkon-atkbtvolive-wmv-high.wm.llnwd.net/atkon_atkbtvolive_wmv_high --sout "#transcode{vcodec=mp2v,acodec=mpga,vb=2400,ab=192}:standard{access=udp,mux=ts{pid-video=1,pid-audio=2,tsid=3},dst=127.0.0.1:4321}" --intf dummy Now open another instance of vlc to play back the transcoded stream: vlc udp://@:4321 If the stream works perfectly, you can close the playback vlc and try to play with xine: xine udp://127.0.0.1:4321 Notice how my examples hardcode the udp port to 4321. If you want to change it, remember to do so to every command. If there's no audio on either of the players you are likely to have something wrong with your vlc installation. If vlc works but xine doesn't then xine cannot for some reason decode the audio stream. > The script sets VPID=parameter+1, APID=parameter+2, SPID=parameter+3 > (I wonder why, since if you want to receive simultaneously two > consecutive parameter things, they overlap anyway). > We try to use pids to make the channels separable from each other. Overlapping should not be a problem because multiple streams are sent to different udp ports (and different iptv devices as well). You can of course modify the script and use different pids if you like. > When looking at the stream info, they show PIDs like 3,4,66. 4,5,66. > I wonder what this 66 is and why... > I think it is the default PMT pid of vlc. -- Antti Seppälä _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
