Hi! Solved by upgrading fontconfig and freetype! /Lars On Sun, Dec 30, 2007 at 12:02:06AM +0100, vdr@xxxxxxxxxxxxxxxx wrote: > Hi again! > > One more thing that maybe has something to do with the the problem - I'm > having a HVR4000 and I'm running the new multiproto-driver patched with > HVR4000 support. > > /Lars > > On > Sat, Dec 29, 2007 at 11:43:24PM +0100, vdr@xxxxxxxxxxxxxxxx wrote: > > Hi! > > > > I'm having a problem with that VDR version 1.5.4 and newer crashes as > > fast as I tries to start them. See below - I have read through the > > changelog but I have no idea what might cause my segfaults. > > > > Dec 29 23:28:15 radiokaka vdr: [1078] VDR version 1.5.4 started > > Dec 29 23:28:15 radiokaka vdr: [1078] codeset is 'ANSI_X3.4-1968' - > > unknown > > Dec 29 23:28:15 radiokaka vdr: [1078] loading plugin: > > ./PLUGINS/lib/libvdr-xine.so.1.5.4 > > Dec 29 23:28:15 radiokaka vdr: [1078] loading /etc/vdr/setup.conf > > Dec 29 23:28:15 radiokaka vdr: [1078] ERROR: unknown config parameter: > > MenuButtonCloses = 0 > > Dec 29 23:28:15 radiokaka vdr: [1078] loading /etc/vdr/sources.conf > > Dec 29 23:28:15 radiokaka vdr: [1078] loading /etc/vdr/diseqc.conf > > Dec 29 23:28:15 radiokaka vdr: [1078] loading /etc/vdr/channels.conf > > Dec 29 23:28:15 radiokaka vdr: [1078] loading /etc/vdr/svdrphosts.conf > > Dec 29 23:28:15 radiokaka vdr: [1079] video directory scanner thread > > started (pid=1078, tid=1079) > > Dec 29 23:28:15 radiokaka vdr: [1079] video directory scanner thread > > ended (pid=1078, tid=1079) > > Dec 29 23:28:15 radiokaka vdr: [1080] video directory scanner thread > > started (pid=1078, tid=1080) > > Dec 29 23:28:15 radiokaka vdr: [1080] video directory scanner thread > > ended (pid=1078, tid=1080) > > Dec 29 23:28:15 radiokaka vdr: [1078] reading EPG data from > > /video/epg.data > > Dec 29 23:28:15 radiokaka vdr: [1078] probing > > /dev/dvb/adapter0/frontend0 > > Dec 29 23:28:15 radiokaka vdr: [1082] tuner on device 1 thread started > > (pid=1078, tid=1082) > > Dec 29 23:28:15 radiokaka vdr: [1083] section handler thread started > > (pid=1078, tid=1083) > > Dec 29 23:28:15 radiokaka vdr: [1078] found 1 video device > > Dec 29 23:28:15 radiokaka vdr: [1078] initializing plugin: xine (0.8.0): > > Software based playback using xine > > Dec 29 23:28:15 radiokaka vdr: [1084] XineRemote control thread started > > (pid=1078, tid=1084) > > Dec 29 23:28:15 radiokaka vdr: [1084] Entering cXineRemote thread > > Dec 29 23:28:15 radiokaka vdr: [1078] setting primary device to 2 > > Dec 29 23:28:16 radiokaka vdr: [1078] assuming manual start of VDR > > Dec 29 23:28:16 radiokaka vdr: [1078] SVDRP listening on port 2001 > > Dec 29 23:28:16 radiokaka vdr: [1078] setting current skin to "sttng" > > Dec 29 23:28:16 radiokaka vdr: [1078] loading > > /etc/vdr/themes/sttng-default.theme > > Dec 29 23:28:16 radiokaka vdr: [1078] starting plugin: xine > > Dec 29 23:28:16 radiokaka vdr: [1078] ERROR: remote control XineRemote > > not ready! > > Dec 29 23:28:16 radiokaka vdr: [1078] switching to channel 1 > > Dec 29 23:28:16 radiokaka vdr: [1088] transfer thread started (pid=1078, > > tid=1088) > > Dec 29 23:28:16 radiokaka vdr: [1089] receiver on device 1 thread > > started (pid=1078, tid=1089) > > Dec 29 23:28:16 radiokaka vdr: [1090] TS buffer on device 1 thread > > started (pid=1078, tid=1090) > > Dec 29 23:28:16 radiokaka vdr[1078] general protection rip:2ac025871bc8 > > rsp:7fff85923740 error:0 > > > > (it crashes without the xine-plugin as well) > > > > I had the same problems with 1.5.3 before I copied arial.ttf and > > arialbd.ttf to /usr...truetype/ > > > > Thanks for any help, > > > > Best regards Lars Fredriksson > > > > _______________________________________________ > > vdr mailing list > > vdr@xxxxxxxxxxx > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
