Hi again! One more thing that maybe has something to do with the the problem - I'm having a HVR4000 and I'm running the new multiproto-driver patched with HVR4000 support. /Lars On Sat, Dec 29, 2007 at 11:43:24PM +0100, vdr@xxxxxxxxxxxxxxxx wrote: > Hi! > > I'm having a problem with that VDR version 1.5.4 and newer crashes as > fast as I tries to start them. See below - I have read through the > changelog but I have no idea what might cause my segfaults. > > Dec 29 23:28:15 radiokaka vdr: [1078] VDR version 1.5.4 started > Dec 29 23:28:15 radiokaka vdr: [1078] codeset is 'ANSI_X3.4-1968' - > unknown > Dec 29 23:28:15 radiokaka vdr: [1078] loading plugin: > ./PLUGINS/lib/libvdr-xine.so.1.5.4 > Dec 29 23:28:15 radiokaka vdr: [1078] loading /etc/vdr/setup.conf > Dec 29 23:28:15 radiokaka vdr: [1078] ERROR: unknown config parameter: > MenuButtonCloses = 0 > Dec 29 23:28:15 radiokaka vdr: [1078] loading /etc/vdr/sources.conf > Dec 29 23:28:15 radiokaka vdr: [1078] loading /etc/vdr/diseqc.conf > Dec 29 23:28:15 radiokaka vdr: [1078] loading /etc/vdr/channels.conf > Dec 29 23:28:15 radiokaka vdr: [1078] loading /etc/vdr/svdrphosts.conf > Dec 29 23:28:15 radiokaka vdr: [1079] video directory scanner thread > started (pid=1078, tid=1079) > Dec 29 23:28:15 radiokaka vdr: [1079] video directory scanner thread > ended (pid=1078, tid=1079) > Dec 29 23:28:15 radiokaka vdr: [1080] video directory scanner thread > started (pid=1078, tid=1080) > Dec 29 23:28:15 radiokaka vdr: [1080] video directory scanner thread > ended (pid=1078, tid=1080) > Dec 29 23:28:15 radiokaka vdr: [1078] reading EPG data from > /video/epg.data > Dec 29 23:28:15 radiokaka vdr: [1078] probing > /dev/dvb/adapter0/frontend0 > Dec 29 23:28:15 radiokaka vdr: [1082] tuner on device 1 thread started > (pid=1078, tid=1082) > Dec 29 23:28:15 radiokaka vdr: [1083] section handler thread started > (pid=1078, tid=1083) > Dec 29 23:28:15 radiokaka vdr: [1078] found 1 video device > Dec 29 23:28:15 radiokaka vdr: [1078] initializing plugin: xine (0.8.0): > Software based playback using xine > Dec 29 23:28:15 radiokaka vdr: [1084] XineRemote control thread started > (pid=1078, tid=1084) > Dec 29 23:28:15 radiokaka vdr: [1084] Entering cXineRemote thread > Dec 29 23:28:15 radiokaka vdr: [1078] setting primary device to 2 > Dec 29 23:28:16 radiokaka vdr: [1078] assuming manual start of VDR > Dec 29 23:28:16 radiokaka vdr: [1078] SVDRP listening on port 2001 > Dec 29 23:28:16 radiokaka vdr: [1078] setting current skin to "sttng" > Dec 29 23:28:16 radiokaka vdr: [1078] loading > /etc/vdr/themes/sttng-default.theme > Dec 29 23:28:16 radiokaka vdr: [1078] starting plugin: xine > Dec 29 23:28:16 radiokaka vdr: [1078] ERROR: remote control XineRemote > not ready! > Dec 29 23:28:16 radiokaka vdr: [1078] switching to channel 1 > Dec 29 23:28:16 radiokaka vdr: [1088] transfer thread started (pid=1078, > tid=1088) > Dec 29 23:28:16 radiokaka vdr: [1089] receiver on device 1 thread > started (pid=1078, tid=1089) > Dec 29 23:28:16 radiokaka vdr: [1090] TS buffer on device 1 thread > started (pid=1078, tid=1090) > Dec 29 23:28:16 radiokaka vdr[1078] general protection rip:2ac025871bc8 > rsp:7fff85923740 error:0 > > (it crashes without the xine-plugin as well) > > I had the same problems with 1.5.3 before I copied arial.ttf and > arialbd.ttf to /usr...truetype/ > > Thanks for any help, > > Best regards Lars Fredriksson > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
