Hi Currently, no, the TZ is set to GMT , the solution is to change it but it will not resolve entierly the problem, when I shutdown the system, the clock of another computer miss many days or year, meaning bios battery is dead and as long this battery is not standard (std=cr2032 or equiv) I cannot change it I was just hoping that the system could first synchronize the system time to transponder inside the init phase and after start operation like schedule. Maybe in future release ? By the way, I will follow the recommandation of Udo Richter and going to ntp solution if I can adapt to my slack/vdrlive system Thanks for your help and time Le mercredi 6 juin 2007 19:04, Klaus Schmidinger a écrit : > On 06/05/07 19:47, PLU Dominique wrote: > > Hi > > > > By the way, I have another question about clock and vdr, I have put vdr > > setting to synchronise time with a specific channel and setup vdr to > > start on this channel. > > Unfortunately , when vdr start, the system is never on time, at least > > there is two hours minus.... > > Are you sure you have set the correct time zone? > > Klaus > > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
