I'm using VDR4You distribution, and I don't want to install kaffeine on it. I want to keep it small ;) I need to check if vdr is sending something that is not suposed to. Note that vdr works for channels on LNB1 if you disable diseqc in the setup. Ilariu On 1/29/07, Gregoire Favre <Gregoire.Favre@xxxxxxxxx> wrote: > > On Mon, Jan 29, 2007 at 01:32:16PM +0000, Ilariu Raducan wrote: > > I also have problems with 4 quad LNBs on a diseqc switch (1.0 and > another > > 2.0) > > If I plug out the cable from the card and plug it back again (reset > switch > > and LNBs) > > I can use szap to change the channels. I believe the quad LNBs have > diseqc > > switch > > inside and at reset they are in backward compatible mode (Tone/Voltage). > > In Diseqc specifications/recommendations they recommend the diseqc LNB > > should ignore responding > > to Tone/Voltage commands when they receive one diseqc command. > > Unfortunately, I did not find the proper diseqc commands for the LNBs. > > > > I will try today a workaround to reset the LNB before sending the > > diseqc.conf sequence in backward compatible mode: > > - switch to another LNB (hope the power will be cut for the one I need > for > > the channel) > > - do the sequence for current channel > > t v [E0 10 38 FF] W500 (switch to LNB4 and wait 500) [E0 10 38 F0] W100 > A > > W15 t (switch to LNB1, wait for power to stabilize, use back compatible) > > > > If I am lucky enough the switch will cut the power for the LNB1 when I > > switch to LNB4. > > > > Does anybody knows the Diseqc commands for Quad LNBs?? > > Very stangely, under kaffeine here all runs perfectly ??? > Did you also try to use your quiete similar setup under kaffeine ? > > I have tried an hudge number of setup, including diseqc reset, resent of > messages... > > Maybe there is only two VDR user with quad lnb in the world using > diseqc ? > -- > Gr?goire FAVRE http://gregoire.favre.googlepages.com > http://www.gnupg.org > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.linuxtv.org/pipermail/vdr/attachments/20070129/9e2781ad/attachment.htm
